Publications
| # | Published Date | Details |
|---|---|---|
| 381. | 17-06-2015 | Performance Evaluation of Thermoacoustic Refrigerator Using Air as Working Medium. International Journal of Thermal Engineering (SSRG-IJTE) volume 1 Issue3 May to June 2015. Authors: Bheemsha, Ramesh Nayak, Pundarika, |
| 382. | 02-06-2015 | Numerical Analyses of Single-Phase Pressure Drop and Forced Convective Heat Transfer Coefficient of Water–Ethanol Mixture: An Application in Cooling of HEV Battery Module, Heat Transfer—Asian Research 45 (7): 681-698. Authors: Suhas B.G and Sathyabhama.A Link |
| 383. | 09-02-2015 | “Experimental Analysis of Temperature Variation in an Air Medium Radiation Field,” International Journal of Innovative Science and Modern Engineering (IJISME) ISSN: 2319-6386, Volume-3 Issue-3, February 2015. Authors: Sudarshan B, Vishwesh Prasad, Prashanth M, Mohammed Ismail Zabi |
| 384. | 01-02-2015 | International publication: “Finite Element Investments of Temperature distribution in Fins with circular perforations”, American Journal of Material science 5(3c), 157-161, 2015. Authors: M. Sudheer, Ashwin Shetty, Shashiraj Somayaji Link |
| 385. | 01-02-2015 | International publication: “Analytical and Numerical validation of Epoxy/Glass structural composites for Elastic Models”, American Journal of Material science 5(3c), 162-168, 2015. Authors: M. Sudheer, Pradyoth K. R, Shashiraj Somayaji Link |
| 386. | 01-01-2015 | Green Manufacturing: It's Tools and Techniques that can be implemented in Manufacturing Sectors
Materials Today: Proceedings 2 (4-5), 3350-3355 Authors: GD Maruthi, R Rashmi Link |
| 387. | 01-01-2015 | Study of Slurry Erosive Wear Behavior of Titania-30 Wt% Inconel-718 Plasma Sprayed Mild Steel using Taguchi Technique
CS Ramesh, R Suresh Kumar, G Dilip Maruthi, R Rashmi
Applied Mechanics and Materials 813, 111-115 Authors: CS Ramesh, R Suresh Kumar, G Dilip Maruthi, R Rashmi Link |
| 388. | 01-01-2015 | Green Manufacturing: It's Tools and Techniques that can be implemented in Manufacturing Sectors Authors: G Dilip Maruthi, R Rashmi Link |
| 389. | 14-11-2014 | Development of desalination unit using solar still coupled with evacuated tubes for domestic use in rural areas, Current Science, Vol. 107, No.10, 25 November 2014, p. 1683 Authors: Praveen T. Hunashikatti, K. R. Suresh, B. Prathima and Gulshan Sachdeva |
| 390. | 16-10-2014 | Tensile and Wear Behaviour of Al-4.5% Cu Alloy Reinforced Fly Ash/SiC by Stir and Squeeze Casting with Rolled Composites. Authors: GN Lokesh, M Ramachandra, KV Mahendra Link |
| 391. | 09-09-2014 | Applied Mechanics and Materials Vols. 592-594 (2014) pp 344-348
© (2014) Trans Tech Publications, Switzerland
doi:10.4028/www.scientific.net/AMM.592-594.344
Fabrication and Comparison of Mechanical properties of Jute and Glass
fibre Reinforced Composites Authors: RAM ROHIT V Link |
| 392. | 14-07-2014 | Experimental Investigation and Performance Evaluation of a Multi turn closed loop pulsating Heat pipe’ International Journal of Applied Mechanics & Materials, Vol.592-594 (2014) pp1554-1558. Authors: Rudra Naik and N. Narendra Babu |
| 393. | 01-07-2014 | “Effect of L/D ratio and the temperature on MR fluid squeeze film damper Performance”, Asian Journal of Engineering and Applied Technology, Vol. 3 No. 2, pp.37-41, 2014. Authors: G. Saravanakumar, L. Ravikumar Link |
| 394. | 01-07-2014 | Finite element analysis of three-fluid heat exchanger for diesel engine exhausts heat recovery system. Applied Mechanics and Materials Vols. 592- 594 (2014) pp 1607-1611. Authors: Kavadiki Veerabhadrappa, K.N. Seetharamu, Chethan Kembhavi, Darshan Dayanand, Vinayakaraddy, Rupanagudi Suresh Kumar Link |
| 395. | 24-06-2014 | “Theoretical Studies on the applications of pulsating heat pipe in vapour compression refrigeration system’ International Journal of Applied Mechanics & Materials, Vol.592-594 (2014) pp1801-1806. Authors: Rudra Naik, Linford Pinto, G Pundarika, Rama Narasimha K Link |
| 396. | 20-06-2014 | Experimental Investigation and Performance Evaluation of a Multi turn Closed Loop Pulsating Heat Pipe,
Applied Mechanics and Materials Vols. 592-594 (2014) pp 1554-1558 Authors: Narendra Babu N and Rudra Naik Link |
| 397. | 20-06-2014 | Thermochemical Cycles for Hydrogen Production, Applied Mechanics and Materials Vols. 592-594
(2014) pp 1820-1824 Authors: Narendra Babu N, Jayaraj S, Pavan Kumar M and Kamath HC Link |
| 398. | 18-06-2014 | • Studies on flexural optimization of glass fabric-epoxy skin/rigid foam core sandwich composites Authors: Suresh, E., Hemnath, T., Padmanabhan, K |
| 399. | 17-06-2014 | Effect of Hot Rolling on Al-4.5% Cu Alloy Reinforced Fly Ash Metal Matrix Composite. Authors: GN Lokesh, M Ramachandra, KV Mahendra Link |
| 400. | 03-06-2014 | Analytical solution of plane Couette flow in the transition regime and comparison with direct simulation Monte Carlo data, Computer and Fluids, Volume 97, Issue 1, pp 177, (2014), (DOI :10.1016/j.compfluid.2014.03.032) Authors: Singh, N., Gavasane, A. and Agrawal, A., Link |