Publications

  • Home
  • Academics
  • Mechanical Engineering
# Published Date Details
1.13-05-2025FCGR-Net: A Novel Approach to Predict Fatigue Crack Growth Rate Behavior in Metals Using Machine Learning J. Eng. Mater. Technol. Oct 2025, 147(4): 041004 (ASME Journal)
Authors: S. Mahesh, A. R. Anil Chandra, L. Ravikumar, C. M. Manjunatha
Link
2.21-04-2025On the microstructural, mechanical, damping, wear properties of magnesium alloy AZ91-3 vol. % SiCP-3 vol. % fly ash hybrid composite and property correlation thereof Journal of Magnesium and Alloys, 2025, ISSN 2213-9567,
Authors: Prince Gollapalli , Mridul Pant, A.R. Anil Chandra, M.K. Surappa
Link
3.29-03-2025“Effect of Boundary Layer Trips on low velocity wind turbine blade: A Computational study” SSRG International Journal of Mechanical Engineering, 12(3):28-35.
Authors: Suhas B.G, Anilchandra A.R, Prema V and Kiran Kumar KU
Link
4.01-03-2025Shashiraj, Pitchaimani, J., & Kattimani, S. (2025, March). Non-linear transient vibration response of graphene origami enhanced metamaterial beams under spatially-varying temperature distributions. In Structures (Vol. 73, p. 108295). Elsevier.
Authors: Shashiraj, Jeyaraj Pitchaimani, Subhaschandra Kattimani
Link
5.24-01-2025Review on self-healing composites GOYA JOURNAL Volume 18 , Issue 01 , January 2025 PP – 255 - 270 ISSN N0 : 0017 - 2715
Authors: V.Bharathi, Nirupama Mohan
Link
6.02-12-2024Ganesan, K., Gupta, A. Predictive simulation framework for replicating energy reduction trends and joint kinematic adaptations in walking with powered ankle exoskeletons. Multibody Syst Dyn (2024).
Authors: Ganesan K., Gupta A.
Link
7.14-11-2024“Effect of Al2O3 and ZrO2 nanoparticles on microstructure and mechanical properties of Mg-AZ91 hybrid nanocomposites” Materials Today Communications 41 (2024) 110988, Nov 14th, 2024, (Q2, Impact factor : 3.7 - 2024)
Authors: • Niranjan CA, Siddhartha Kar, Srinivas S, Vikram Kumar S Jain, Siddaraju C
Link
8.19-10-2024Shashiraj, Pitchaimani, J., & Kattimani, S. (2024). Nonlinear buckling and free vibration analysis of auxetic graphene origami composite beams under nonuniform thermal environment. Mechanics Based Design of Structures and Machines, 1-32.
Authors: Shashiraj, Jeyaraj Pitchaimani, Subhaschandra Kattimani
Link
9.04-10-2024Somayaji, S., Narahari, N., Srivatsa, S. R., & Godi, S. C. (2024). Exploring the potential application of technology for revitalizing traditional performance arts: Costume and musical elements in Yakshagana. Arts & Communication, 2(4), 3052.
Authors: Shashiraj Somayaji, N Narahari, Shivashankar R. Srivatsa, Sangamesh C. Godi
Link
10.27-09-2024Evaluation of Residual Stress in Stir-squeeze Cast Aluminium – Fly Ash Composites Using X-Ray Diffraction Method Journal of Mines, Metals and Fuels, 72(8): 873-881; 2024.
Authors: V Bharathi, AR Anil Chandra
Link
11.24-09-2024“Optimising abrasive water jet cutting parameters for direct metal laser sintered Inconel 718: a study of cutting efficiency and surface quality”, International Journal on Interactive Design and Manufacturing (IJIDeM), (Q2, Impact factor : 2.1- 2023), Published online: 24 September 2024
Authors: • Prathiksha Salian, V. Dillibabu, S. Srinivas, Muhammed Anaz Khan
Link
12.15-09-2024Preliminary Studies on Gas Foil Thrust Bearings with Stepped Foils, Tribology Online, 2024, 19 ?, 5 ?, p. 448-453, ??? , Online ISSN 1881-2198, https://doi.org/10.2474/trol.19.448, https://www.jstage.jst.go.jp/article/trol/19/5/19_448/_article/-char/ja, ??:
Authors: Supreeth Shivakumar, Thipaaiah NagaRaju, Rattehalli Ningachar Ravikumar
Link
13.10-09-2024" Experimental Investigation on Properties of Kevlar-CarbonGlass Fibre Reinforced Polyester Composites for Aerospace Application" Goya Journal,Volume 17 , Issue 09 , 2024:ISSN N0 : 0017 - 2715
Authors: Vishwas. S1 , Dr. B.N. Sarada2 , Dr. P.L. Srinivasa Murthy3
Link
14.09-09-2024Optimization of Vibro-Acoustic Characteristics of Cold Rolled Sandwich Steel Cylindrical Shell with Internal Voids Using Response Surface Methodology, Journal of Vibration Engineering & Technologies
Authors: Anilkumar A, Rammohan Y S & B S Suresh
Link
15.08-09-2024Thermal cycle behaviour of plasma sprayed thermal barrier coatings on cast iron substrate for the application of liner of internal combustion engine
Authors: Haridasa Nayak, Varun K R, Venkatesh M. K, Sonal Shamkuwar, R. Suresh Kumar, Sudarshan T A, Abhijeet Malge, Vijay M, C. Durga Prasad
Link
16.06-09-2024Predictive wear analysis of SS316L fabricated by direct energy deposition using machine learning techniques
Authors: M. Arunadevi, R. Shivashankar, C. DurgaPrasad, Rajesh Baitha, R. SureshKumar, Ranjeet Kumar Choudhary, Shanthala Kollur, Kaustubh R. Kapadani, S. ShivaPrakash
Link
17.01-09-2024 An Experimental Investigation on Effect of B 4 C/CeO 2  Reinforcements on Mechanical, Fracture Surface and Wear Characteristics in Al7075 Hybrid Metal Matrix Composites, The International Journal of Integrated Engineering, Scopus.
Authors: Ravikumar M1*, Hanumanthe Gowda2, Umesh G L3, Raghavendra S4, Darshan S M5, Shivakumar M M1
Link
18.29-08-2024Somayaji, A., MD, K., Somayaji, S., Fernandes, P., & Marakini, V. (2024). 3D finite element analysis of carbon fiber reinforced aluminium alloy wheel. Interactions, 245(1), 252.
Authors: Peter Fernandes & Vikas Marakini Ananthkrishna Somayaji, Kiran M D, Shashiraj Somayaji
Link
19.29-07-2024Optimization of Processing Parameters and Wear Performance of B4C Reinforced AA6061 Composites Through Taguchi Methodology
Authors: C. Manjunatha, K. R. Varun, K. C. Nagaraja, Piyush Kumar Soni, R. Suresh Kumar, Chandan Prasad, Prakash Kumar, K. G. Nithesh
Link
20.17-07-2024 A Comprehensive framework for prioritizing alternative strategies in information management for micro, small, and medium enterprises (MSMEs) supply chain: a hybrid AHP-FUZZYTOPSIS approach
Authors: Mahesh Ratnappa Latte, Channappa M. Javalagi, R. Suresh Kumar, Ranjeet Kumar Choudhary, Sangita, Hanamant Yaragudri, H. S Nithin
Link