Publications

  • Home
  • Academics
  • Mechanical Engineering
# Published Date Details
21.05-01-2026Intelligent Material Characterization: A ML Approach for Predicting Microstructure of Nanomaterials
Authors: Suresh Erannagari1 , Kuzhaloli.S2 , Dr. R. Thinesh Kumar3 , M.R.Nithyaa4 , Dr. A. M. Arun Mohan5 , B Veera Jyothi6
Link
22.28-12-2025Structural Optimization and Performance Improvement of Three-Wheeled Light Weight Tippers using CAE Method, International Journal of Vehicle Structures & Systems, Vol:17, No: 5, PP:902-908, 2025
Authors: Sangamesh Mahalingappa Akki, Mahantesh M. Math, V. L. Jagannatha Guptha, Santhosh D., Ramkrishna Hegade, Vivekanand S. Gogi, A. C. Prapul Chandra, and L. J. Kirthan
Link
23.23-12-2025Experimental studies and optimisation of machining performance measurement for Al7075/n-SiCp composite by using RSM and ANN techniques. Canadian Metallurgical Quarterly, 1–14. https://doi.org/10.1080/00084433.2025.2604905.
Authors: M. Ravikumar,M. Rudresh,N. Raghu,A. Shivaramakrishna,Chitrada Prasad,Bhaskara Rao Gorle,R. Suresh,C. Vijayavardhana,K. A. Jayasheel Kumar,M. S. Sachin,M. V. Praveen Kumar & C. Durga Prasad
Link
24.19-12-2025Experimental investigation and parametric optimization of machinability and surface characteristics in wire EDM of Inconel 718, Scientific Reports, (2025) 15:33947, (2025) 15:33947
Authors: Siddhartha Kar, Niranjan C A, Prabhuswamy N R, Tanmoy Majumder, Binoy Kumar Baroi & Alemu Workie Kebede,
Link
25.19-12-2025Dynamic Structural Analysis Of An FSAE Chassis For Rider Comfort
Authors: Suresh Kumar R , Anantha Padmanabham K.C , Satvik S P , Sashank V V N
Link
26.01-12-2025Jet impingement heat transfer characteristics of round surface geometries: A Review, Results in Engineering, Elsevier Publisher
Authors: Santosh B. Bopche, Chidanand K. Mangrulkar, Sangamesh C. Godi, Suraj Vairagade , Arunkumar H S c
Link
27.19-11-2025Impact of Waveform Shape on the Properties of Ni Coatings in Pulsed Electro-Deposition for Durability of Industrial Surfaces: A Comparative Study of Rectangular and Triangular Pulses
Authors: Chitrada Prasad, R Suresh Kumar, G N Kumaraswamy, Praveen Kumar M V , Yogesha K B , Akshay Kumar H S , C.Durga Prasad, Ahobal. N, Subash Acharya
Link
28.18-11-2025Wake Dynamics and Vortex Synchronization in Multi-Cylinder Arrays: A Computational Insight into Aerodynamic Performance and Flow Interference, Computation, vol 13, issue 11, 271.
Authors: Sunil Chamoli, Chidanand K Mangrulkar, Anirudh Uniyal, Mohit Bhatt, Nikhil Joshi, Abhishek Rawat, Kapil Bhatt, Pawan Kumar Pant, Varesa Chuwattanakul, Smith Eiamsa-ard
Link
29.13-11-2025Study on mechanical, wear, corrosion and fracture characteristics of Al7075 by modifying nano sized Magnesium (n-Mg) element. (2025). Fracture and Structural Integrity, 20(75), 326-338. https://doi.org/10.3221/IGF-ESIS.75.23.
Authors: M Ravikumar, Hanumanthe Gowda, GL Umesh, NK Manjunath
Link
30.05-11-2025Analyzing the effect of n-TiB2 on hardness, corrosion behavior, and statistical study of machining parameters on Al7075 nano composite. Canadian Metallurgical Quarterly, 1–14. https://doi.org/10.1080/00084433.2025.2580820.
Authors: M. Ravikumar,K.Y. Chethana,Swetti Jha,Ashwin C. Gowda,K.C. Nagaraja,M.V. Praveen Kumar,R. Nagesh Kumar,C. Vijayavardhana,S. Harish &C. Durga Prasad
Link
31.11-10-2025Recent Advances in Injectable Polymer–Ceramic Composites for Tissue Engineering Applications, GOYA Journal, Volume 18 , Issue 10 , October 2025, pp 157-176
Authors: Nirupama Mohan, V.Bharathi
Link
32.03-10-2025Jet impingement heat transfer characteristics of round surface geometries: A Review, Results in Engineering, Elsevier, 107549
Authors: Santosh B Bopche, Chidanand K Mangrulkar, Sangamesh C Godi, Suraj Vairagade, Arunkumar HS
Link
33.19-09-2025Microstructure and nanomechanical properties of TaN coating prepared by RF magnetron sputtering Materials Physics and Mechanics. 2025;53(5): 90–98
Authors: G. Saravanakumar, P. Gomathi, V. Bharathi, L. Ravikumar, G. Balakrishnan
Link
34.17-09-2025 Modeling and Analysis of Biodegradable Helmet Liner: A Comparative Study, (2025) International Journal of Environmental Science, 11(23), 4015-4021.
Authors: Suhas BG
Link
35.11-09-2025Studies on mechanical, fractured surface, wear, and thermal characteristics of TiC reinforced structural grade Al6061 MMCs. (2025). Fracture and Structural Integrity, 19(74), 373-384. https://doi.org/10.3221/IGF-ESIS.74.23.
Authors: T P Gowrishankar, G L Umesh, B R Vinod, M Ravikumar
Link
36.08-09-2025'Influence of Ti substitution and sintering temperature on the dielectric and AC conductive properties of BaFe12O19 nanoferrites', J Mater Sci: Mater Electron 36, 1638 (2025)
Authors: Aparna, A.R., Rammohan, Y.S., Shamanth, P.V. et al.
Link
37.28-08-2025Stand-alone Doubly-Fed induction generator system using single inverter and battery storage
Authors: Sekhar Nindra,G Dilip Maruthi
Link
38.20-08-2025Shashiraj, Pitchaimani, J., & Kattimani, S. (2025). Non-linear thermal stability and free vibration behavior of sandwich beams with auxetic re-entrant aluminum cores and graphene origami-enhanced facings. Composite Structures, 119564.
Authors: Shashiraj, Jeyaraj Pitchaimani, Subhaschandra Kattimani
Link
39.10-08-2025Study on B4C Particulates Size on Mechanical Behavior, Fractured Surface and Optimization of the Wear Parameters of the Al7075 Composites by Statistical Approach. (2025). Fracture and Structural Integrity, 19(74), 73-88. https://doi.org/10.3221/IGF-ESIS.74.06
Authors: M Ravikumar
Link
40.07-08-2025Application of machine learning and MOGA for predictive modelling and optimization of Inconel 718 machining in WEDM, Eng. Res. Express 7 (2025) 045406, Eng. Res. Express 7 (2025) 045406
Authors: Siddhartha Kar, NiranjanCA, Prabhu Swamy Naraseekatte Ranga Swamy and Tanmoy Majumder,
Link