Publications
| # | Published Date | Details |
|---|---|---|
| 361. | 02-09-2016 | Evaluation of corrosion property of Aluminium-zirconium dioxide (AlZrO2) Nano-composites Authors: M Ramachandra, G Dilip Maruthi, R Rashmi Link |
| 362. | 12-07-2016 | Influence of stack geometry on the performance of thermoacoustic refrigerator Indian Academy of Sciences; MS received 7 October 2015; revised 8 May 2016 Authors: B RAMESH NAYAK, G PUNDARIKA and BHEEMSHA ARYA, |
| 363. | 29-06-2016 | “Feasibility and Performance Studies of a Semi-Active Journal Bearing”,
Procedia Technology, Elsevier, Vol. 25, 2016, Pages 1154-1161. Authors: Raghu Yogaraju, L. Ravikumar, V. Arun Kumar and G. Saravanakumar, Link |
| 364. | 17-05-2016 | Title: Size modulated transition in the fluid-structure interaction losses in nanomechanical beam resonators
Journal: Journal of Applied Physics
Vol: 119
PP: 194303
Year: 2016 Authors: Santhosh Doreswamy, Ashok Kumar Pandey, Jeevak M. Parpia, S. S. Verbridge, H. G. Craighead and Rudra Pratap Link |
| 365. | 08-05-2016 | Comparison of Dry and Wet Sliding Wear Behavior of Squeeze Cast
Aluminum Alloy Authors: V Bharathi, M Ramachandra, S Srinivas Link |
| 366. | 25-04-2016 | “Determination of damping coefficient of a bump foil squeeze film damper”, international Journal of Vehicle Structures and Systems, Vol. 8(4), 246-249, 2016. Authors: G. Saravanakumar, L. Ravikumar, Raghu Yogaraju, V. Arun Kumar, C. Sharavankumar Link |
| 367. | 22-04-2016 | “Feasibility and performance studies of semi active journal bearings”, Elsevier Procedia Technology, Vol 25, pp:1154-1161, 2016. Authors: G. Saravanakumar, L. Ravikumar, Raghu Yogaraju, V. Arun Kumar, C. Sharavankumar Link |
| 368. | 04-04-2016 | “Feasibility and performance studies of Semi Active Journal Bearings”, Procedia technology, Vol 25, pp1154-1161 Elsevier, 2016.
“Effect of L/D Ratio and the Temperature on MR Fluid Squeeze Film Damper
Performance”, Asian Journal of Engineering and Applied Technology, Vol. 3
No. 2, pp.37-41, 2014.
. “Dynamic characteristics of MR fluid short squeeze film damper in terms of
Reynolds number”, Journal of Aerospace Sciences and Technologies Vol
62(2), 141-151, 2010
“Dynamic instability characteristics of laminated composite doubly curved panels subjected to partially distributed follower edge loads”. International Journal of Solids and Structures. Vol 42(8), pp 2243-2264, 2005.
“Tension buckling and parametric instability characteristics of doubly curved panels with circular cutout subjected to non-uniform tensile edge loading”. Thin Walled Structures, 42(7), 947-962, 2004.
“Tension Buckling and vibration behaviour of laminated composite curved panels subjected to partial edge loading”, Composite Structures, 60, 171-181,
2003.
Authors: Ravikumar L |
| 369. | 01-04-2016 | “Comparative Experimental analysis of Load carrying capability of Air foil thrust bearing for different configuration of foil assembly” . Authors: Ravikumar.R.N.,Rathanraj.K.J., ArunKumar. V (2016). ScienceDirect Link |
| 370. | 01-03-2016 | Fatigue life prediction of a unidirectional carbon fiber composite under off-axis spectrum loads using 3D constant life diagram Authors: M. Hussain et al. Link |
| 371. | 01-03-2016 | "Calibration of Hollow Operating Shaft Natural Frequency by Non-Contact Impulse Method", IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE)
e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 13, Issue 2 Ver. I (Mar. - Apr. 2016), PP 54-60, www.iosrjournals.org Authors: Sharanagouda G Malipatil, H. M. Shivaprasad, Link |
| 372. | 06-01-2016 | Effects of Silver Doping on Microstructure of Nanostrips, Tetragonality, and Mechanical Properties in Ni41?xAgxMn50Sn9 (x ? 2) Heusler Alloys Authors: H. R. Prakash, S. Ram , HJF, K. Brühne |
| 373. | 02-01-2016 | Conjugate Heat Transfer Investigation of Core Damage Propagation during Total Instantaneous Blockage in SFR Fuel Subassembly’, Annals of Nuclear Energy,90 (2016), 371–388. Authors: Ravi, L., Velusamy, K., Chellapandi, P Link |
| 374. | 12-12-2015 | “Magnetorhelogical fluid and grease based squeeze film dampers- A comparison”, International Journal of Mechanical Engineering and Material Science, Vol 8(1), 49-53, 2015. Authors: G. Saravanakumar, L. Ravikumar |
| 375. | 01-12-2015 | "Calibration for Non-Contact Loading Potential as Function Gap and Voltage-Current for Static and Operating Shaft", International Journal of Innovative Research in Science Engineering and Technology, Vol. 4, Issue 12, December 2015, ISSN(Online): 2319-8753
ISSN (Print): 2347-6710 Authors: Sharanagouda G Malipatil, H. M. Shivaprasad, G. Giridhara Link |
| 376. | 30-11-2015 | “ Development of wind powered mobile charger ’’ Authors: Shafiur Rahman, M.G.Patil Link |
| 377. | 26-11-2015 | study of Slurry Erosive Wear Behavior of Titania-30 Wt% Inconel-718 Plasma Sprayed Mild Steel using Taguchi Technique Authors: CS Ramesh, R Suresh Kumar, G Dilip Maruthi, R Rashmi |
| 378. | 01-11-2015 | A study of Corrosive behavior of Al6061 plasma sprayed with Titania and Inconel 718, Applied Mechanics and Materials Vols. 813-814 (2015) pp 151-155. Authors: C.S. Ramesh, R. Suresh Kumar, G. Dilip Maruthi, Mohammed Faizan Link |
| 379. | 01-11-2015 | Study of Slurry Erosive Wear Behavior of Titania-30Wt% Inconel-718 Plasma Sprayed Mild Steel using Taguchi Technique, Applied Mechanics and Materials Vols. 813-814 (2015) pp 111- Authors: C.S. Ramesh, R. Suresh Kumar, G. Dilip Maruthi, R. Rashmi Link |
| 380. | 15-10-2015 | Think green to drive green computing Authors: G Dilip Maruthi,Rashmi R |