Publications
| # | Published Date | Details |
|---|---|---|
| 321. | 01-01-2018 | Mechanical and dry sliding wear behaviour of hot rolled hybrid composites produced by direct squeeze casting method Authors: GN Lokesh, M Ramachandra, KV Mahendra Link |
| 322. | 01-01-2018 | Characterization of Aluminium Metal Matrix Composite Produced by Squeeze Casting Technique Authors: Subbaraya Mohan Kumar, S Srinivas, M Ramachandra, KV Mahendra Link |
| 323. | 01-01-2018 | An Experimental Study on Depth of Cut of AZ91 Magnesium Alloy in Abrasive Water Jet Cutting Authors: CA Niranjan, S Srinivas, M Ramachandra Link |
| 324. | 01-01-2018 | A Study on Mechanical Properties of Silk Fiber Reinforced Epoxy Resin Bio-Composite With SiC As Filler Addition Authors: S Akash, S Avinash, M Ramachandra Link |
| 325. | 01-01-2018 | Advanced materials for wind turbine blade- A Review Authors: Lijin Thomas, M Ramachandra Link |
| 326. | 01-01-2018 | Determination of Abrasive Wear Behaviour of Al-Fly ash Metal Matrix Composites Produced by Squeeze Casting Authors: KNP Prasad, M Ramachandra Link |
| 327. | 01-01-2018 | Green Composites: A Review Authors: HS Sharath Shekar, M Ramachandra Link |
| 328. | 22-12-2017 | ”Finite Element Analysis of Typical Ground Based Composite Sandwich Radome” Int. Journal of Engineering Research and Application ISSN : 2248-9622, Vol. 7, Issue 12, ( Part -2) December 2017, pp.05-11.
Authors: Pavan Raj S , Dr. H.K.Rangavittal |
| 329. | 30-11-2017 | "Microstructure and Hardness of A356 Reinforced With Micro and Nano Al2O3 Particles Processed by Powder Metallurgy Technique.
IJSART volume 3 Issue 11,-November 2017 Authors: Kiran Kumar N,Sarada B.N.,P.L.SrinivasaMurthy Link |
| 330. | 29-11-2017 | “Effect of Clearance Profile on the Performance of Semi Active Journal Bearing” in International
Journal of Emerging Technology & Advanced Engineering, Vol. 7, Issue
11, November, 2017.
Authors: Raghu Yogaraju, L. Ravikumar and V. Arun Kumar Link |
| 331. | 11-10-2017 | MEASUREMENT AND ANALYSIS OF MAGNETIC FLUX DENSITY USING 3 AXIS BOT Authors: RAM RHIT V Link |
| 332. | 13-09-2017 | International Journal of Emerging Technology and Advanced Engineering
Conceptual Design, Analysis and Optimization of Unmanned Aerial Vehicle Authors: RAM ROHIT V Link |
| 333. | 13-09-2017 | International Journal for Research in Applied Science & Engineering Technology (IJRASET)
Modular Autonomous Unmanned Aerial Vehicle
for Agricultural Assistance Authors: RAM ROHIT V Link |
| 334. | 11-09-2017 | Effect of exhaust gas recirculation rate on performance, emission and combustion characteristics of common rail diesel engine fuelled with n-butanol-diesel blends, Biofuels, doi.org/10.1080/17597269.2017.1369631 Taylor and Francis. Authors: Venkatesh T. Lamani, Ajay Kumar Yadav, G. N. Kumar, Link |
| 335. | 01-09-2017 | Effect of Orientation of Semi-Elliptical Crack in a Turbine Blade on Stress Intensity Factor. ISME Journal of Mechanics and Design, Vol. 1, No. 2, PP. 1-10, 2017 Authors: Sharth B N, J. Sharana Basavaraja and Shivashankar R Srivatsa Link |
| 336. | 25-08-2017 | Performance, emission and combustion characteristics of twin cylinder common rail diesel engine fuelled with butanol-diesel blends, Environmental Science and Pollution Research,2017:24(29), 23351-23362.doi.org/10.1007/s11356-017-9956-7 Springer. Authors: Venkatesh T. Lamani, Ajay Kumar Yadav, Kumar G.N, Link |
| 337. | 02-08-2017 | Experimental study on forced convective and subcooled flow boiling heat transfer coefficient of water-ethanol mixtures: An application in cooling of heat dissipative devices”, Heat and Mass Transfer, Springer 54: 277-290. Authors: B.G Suhas and Sathyabhama.A Link |
| 338. | 01-08-2017 | Prediction of mode II delamination propagation life under a standard spectrum loading in a carbon fiber composite Authors: Anilchandra, A.R., Bojja, R., Jagannathan, N., Manjunatha, C.M Link |
| 339. | 20-07-2017 | • Influence of hygrothermal conditioning on strength and stiffness of rigid foam core glass/epoxy skin sandwich composites Authors: Suresh, E, Vishnu Vardhan Reddy, D., Ramya, M., ., Padmanabhan, K |
| 340. | 20-07-2017 | • Finite Element Analysis of Glass/Epoxy Skin and Rigid Foam Core Sandwich Composites - Simulation of Shear Modes and Flexural Modes of Failure Authors: Suresh, E, Chandra, M., Ramya, M., Suresh, E., Padmanabhan, K |