Publications
| # | Published Date | Details |
|---|---|---|
| 341. | 01-02-2015 | International publication: “Analytical and Numerical validation of Epoxy/Glass structural composites for Elastic Models”, American Journal of Material science 5(3c), 162-168, 2015. Authors: M. Sudheer, Pradyoth K. R, Shashiraj Somayaji Link |
| 342. | 01-01-2015 | Green Manufacturing: It's Tools and Techniques that can be implemented in Manufacturing Sectors
Materials Today: Proceedings 2 (4-5), 3350-3355 Authors: GD Maruthi, R Rashmi Link |
| 343. | 01-01-2015 | Study of Slurry Erosive Wear Behavior of Titania-30 Wt% Inconel-718 Plasma Sprayed Mild Steel using Taguchi Technique
CS Ramesh, R Suresh Kumar, G Dilip Maruthi, R Rashmi
Applied Mechanics and Materials 813, 111-115 Authors: CS Ramesh, R Suresh Kumar, G Dilip Maruthi, R Rashmi Link |
| 344. | 01-01-2015 | Green Manufacturing: It's Tools and Techniques that can be implemented in Manufacturing Sectors Authors: G Dilip Maruthi, R Rashmi Link |
| 345. | 14-11-2014 | Development of desalination unit using solar still coupled with evacuated tubes for domestic use in rural areas, Current Science, Vol. 107, No.10, 25 November 2014, p. 1683 Authors: Praveen T. Hunashikatti, K. R. Suresh, B. Prathima and Gulshan Sachdeva |
| 346. | 16-10-2014 | Tensile and Wear Behaviour of Al-4.5% Cu Alloy Reinforced Fly Ash/SiC by Stir and Squeeze Casting with Rolled Composites. Authors: GN Lokesh, M Ramachandra, KV Mahendra Link |
| 347. | 09-09-2014 | Applied Mechanics and Materials Vols. 592-594 (2014) pp 344-348
© (2014) Trans Tech Publications, Switzerland
doi:10.4028/www.scientific.net/AMM.592-594.344
Fabrication and Comparison of Mechanical properties of Jute and Glass
fibre Reinforced Composites Authors: RAM ROHIT V Link |
| 348. | 14-07-2014 | Experimental Investigation and Performance Evaluation of a Multi turn closed loop pulsating Heat pipe’ International Journal of Applied Mechanics & Materials, Vol.592-594 (2014) pp1554-1558. Authors: Rudra Naik and N. Narendra Babu |
| 349. | 01-07-2014 | “Effect of L/D ratio and the temperature on MR fluid squeeze film damper Performance”, Asian Journal of Engineering and Applied Technology, Vol. 3 No. 2, pp.37-41, 2014. Authors: G. Saravanakumar, L. Ravikumar Link |
| 350. | 01-07-2014 | Finite element analysis of three-fluid heat exchanger for diesel engine exhausts heat recovery system. Applied Mechanics and Materials Vols. 592- 594 (2014) pp 1607-1611. Authors: Kavadiki Veerabhadrappa, K.N. Seetharamu, Chethan Kembhavi, Darshan Dayanand, Vinayakaraddy, Rupanagudi Suresh Kumar Link |
| 351. | 24-06-2014 | “Theoretical Studies on the applications of pulsating heat pipe in vapour compression refrigeration system’ International Journal of Applied Mechanics & Materials, Vol.592-594 (2014) pp1801-1806. Authors: Rudra Naik, Linford Pinto, G Pundarika, Rama Narasimha K Link |
| 352. | 20-06-2014 | Experimental Investigation and Performance Evaluation of a Multi turn Closed Loop Pulsating Heat Pipe,
Applied Mechanics and Materials Vols. 592-594 (2014) pp 1554-1558 Authors: Narendra Babu N and Rudra Naik Link |
| 353. | 20-06-2014 | Thermochemical Cycles for Hydrogen Production, Applied Mechanics and Materials Vols. 592-594
(2014) pp 1820-1824 Authors: Narendra Babu N, Jayaraj S, Pavan Kumar M and Kamath HC Link |
| 354. | 18-06-2014 | • Studies on flexural optimization of glass fabric-epoxy skin/rigid foam core sandwich composites Authors: Suresh, E., Hemnath, T., Padmanabhan, K |
| 355. | 17-06-2014 | Effect of Hot Rolling on Al-4.5% Cu Alloy Reinforced Fly Ash Metal Matrix Composite. Authors: GN Lokesh, M Ramachandra, KV Mahendra Link |
| 356. | 03-06-2014 | Analytical solution of plane Couette flow in the transition regime and comparison with direct simulation Monte Carlo data, Computer and Fluids, Volume 97, Issue 1, pp 177, (2014), (DOI :10.1016/j.compfluid.2014.03.032) Authors: Singh, N., Gavasane, A. and Agrawal, A., Link |
| 357. | 01-05-2014 | Design of Experiments to Study Slurry Erosive Wear Behavior of Inconel-718 coatings on Copper, Advanced Materials Research, Vol. (2014), pp. Authors: C.S. Ramesh, Rupanagudi Suresh Kumar, Sikhakolli Ramakrishna, Venkatesh K.G. Kashyap Link |
| 358. | 14-04-2014 | Title: Evaluation of Mode Dependent Fluid Damping in a High Frequency Drumhead Microresonator
Journal: Journal of Microelectromech. Syst.
Vol: 23
No: 2
PP: 334--346
April 2014.
JMEMS RightNow Paper for Excellent quality in the April Issue of JMEMS journal Authors: Santhosh Doreswamy, Ashok Kumar Pandey, Jeevak M. Parpia, Darren Robert Southworth, Harold G. Craighead, and Rudra Pratap Link |
| 359. | 01-04-2014 | Study of Effect of Coating of Piston on the Performance of a Diesel Engine, SAE International Journal of Materials and Manufacturing, 2014 vol. 7 (2014) pp.3633-3637
https://doi.org/10.4271/2014-01-1021. Authors: Suresh Kumar Rupangudi, C.S. Ramesh, Kavadiki Veerabhadhrappa, Ram Rohit V Link |
| 360. | 03-02-2014 | , “Experimental Investigation on Characteristics of Non-Newtonian Fluids,” International Journal of Engineering Development and Research (IJEDR), ISSN: 2321-9939, Volume 2, Issue 4, 2014. Authors: Sudarshan B, Narayan U Rathod, and Victor Seram |