Publications
| # | Published Date | Details |
|---|---|---|
| 421. | 13-02-2013 | Production of Al-4.5% Cu Alloy Reinforced Fly Ash and SiC Hybrid Composite by Direct Squeeze Casting. Authors: GN Lokesh, M Ramachandra, KV Mahendra Link |
| 422. | 15-01-2013 | “Experimental Investigation and Performance Evaluation of a Closed Loop Pulsating Heat Pipe”, Journal of Applied Fluid Mechanics, Vol. 6, No. 2, April 2013.pp 267-275. Authors: Rudra Naik, Venugopal Varadarajan, G Pundarika,Rama Narasimha K Link |
| 423. | 01-01-2013 | Mechanical Performance of Test Fixture During Thermo Elastic Deformation Studies, International Journal of Engineering Research and Technology, Vol. 2, N. 11, pp 2432 – 2435, November 2013 Authors: P R Praveen, T. S. Sriranga, H. Abdul Hameed, and J. Sharana Basavaraja Link |
| 424. | 08-11-2012 | “ Study of Magnetic Abrasive Finishing using Mechanically Alloyed Magnetic Abrasives’’ Authors: M.G.Patil, K.Chandra & P.S.Misra Link |
| 425. | 10-10-2012 | “Study of Mechanically Alloyed Magnetic Abrasives in Magnetic Abrasive Finishing ” Authors: M.G.Patil, Kamlesh Chandra, P.S.Misra Link |
| 426. | 25-09-2012 | Experimental investigation of single cylinder 4S SI engine with hydrogen blends”, International Journal of Mechanical Engineering and Technology (IJMET) 3: 84-95. Authors: Suhas B.G, Shivaprasad K.V and Kumar G.N Link |
| 427. | 03-07-2012 | HIGH PROFILE SHIFT GEARING USING ALTERED TOOTH-SUM GEARING Authors: Prakash H R, Sachidananda H.K.,Gonsalvis |
| 428. | 01-07-2012 | Mathematical and Neural Network models for prediction of wear of mild steel coated with Inconel 718 – A Comparative Study, IJSRP, Volume 2, Issue 7, (2012), ISSN 2250-3153 Authors: C.S Ramesh, R. Suresh Kumar Link |
| 429. | 07-06-2012 | Experimental investigation of fatigue behavior of spur gear in altered tooth-sum gearing Authors: Prakash H R, Sachidananda H.K.,Gonsalvis |
| 430. | 01-06-2012 | International publication: “Finite Element Analysis of thermal characteristics of annular fins with different profiles”, APRN Journal of Engineering and Applied sciences, Vol7, No.6, JUNE 2012. Authors: M. Sudheer , G. Vignesh Shanbhag , Prashanth Kumar and Shashiraj Somayaji Link |
| 431. | 04-04-2012 | Analysis of Contact Stresses in Altered Tooth-Sum Spur Gearing Authors: Prakash H R, Sachidananda H.K.,Gonsalvis |
| 432. | 01-01-2012 | Effects of working fluids on the performance of multi-turn Pulsating heat pipe” International journal of earth sciences and Engineering, Spl. Edn. Vol. 5, No. 1, January 2012, pp 100-105. Authors: Rudra Naik, Linford Pinto, G Pundarika, Rama Narasimha K Link |
| 433. | 30-12-2011 | ‘Design of a Parallel Plate Stack for a Thermoacoustic refrigerator’ International Journal of Advanced Scientific & Technical Research, Issue1, Vol 2, page 1-20, December 2011. Authors: Bheemsha, Ramesh Nayak & Pundarika.G, |
| 434. | 15-12-2011 | Design of the Resonator Tube and Buffer Volume for Thermo Acoustic Refrigerator’ International Journal of Advanced Scientific & Technical Research, Issue1, Vol 2, page
276-288, December 2011.
Authors: Bheemsha, Ramesh Nayak & Pundarika.G, |
| 435. | 05-12-2011 | “ Magnetic Abrasive Finishing – A Review” Authors: M.G.Patil, K.Chandra & P.S.Misra Link |
| 436. | 01-12-2011 | Design and Optimization of a Thermoacoustic Refrigerator’, International Journal of Emerging Trends in Engineering and Development, issue1, Vol2, page 47-65, 2011 Authors: Bheemsha, Ramesh Nayak & Pundarika.G, |
| 437. | 15-10-2011 | “Design and Analysis of Propellant Tanks Support Structure for an Advanced Spacecraft” International Journal Of Applied Research In Mechanical Engineering (IJARME) ISSN: 2231 –5950, VOL-I, ISSUE-II 2011 Authors: Abdul Khaleelullah, Sk. J. Basha ,H. K. Rangavittal |
| 438. | 01-10-2011 | Slurry erosive wear behaviour of plasma sprayed Inconel-718 coatings on Aluminum substrate, Journal of Minerals & Materials Characterization & Engineering, Vol. 10, No.5, (2011), pp.445-453. Authors: C.S. Ramesh, Suresh Kumar,, D.S. Devaraj, R. Keshavamurthy Link |
| 439. | 23-08-2011 | Design, fabrication and performance evaluation of axially grooved wick assisted heat pipe, International Journal of Engineering Systems Modelling and Simulation Vol. 2:25-39. August 2011 Authors: Rudra Naik,Venugopal Varadarajan, G Pundarika Link |
| 440. | 17-08-2011 | Influence of High Profile Shift Improving Surface Durability. Authors: Prakash H R, Sachidananda H.K.,Gonsalvis, L Naik |