Publications
| # | Published Date | Details |
|---|---|---|
| 61. | 28-12-2019 | Use of magnetic nanoparticles for effective hyperthermia of liver tumor’ IHMTC-2019, IIT Roorke
Authors: Rudra Naik, Venkatesh T Lamani |
| 62. | 28-12-2019 | ‘Analysis of Fire Ventilation System in an Underground Car Park’ IHMTC-2019, IIT Roorkee. Authors: Rudra Naik, Venkatesh T Lamani, Ravi L |
| 63. | 07-11-2019 | “Optimum Injection Timings For Bioethanol-Diesel Blends And Its Effect On Tail Pipe Emission In Common Rail Diesel Engine” International Conference On Advance Trends in Mechanical & Aerospace Engineering 7th – 9th November 2019 Authors: Rudra Naik, Venkatesh T. Lamani, Adithya U. Baliga M., et.al. |
| 64. | 05-09-2019 | “State of art technologies in agriculture and recommendation to improve farmer’s economy through solar tree concept” National Conference on Biotechnology and Sustainable Agriculture 5th – 7th September 2019 Authors: Rudra Naik, Venkatesh Lamani, Ravi L, Bheemsha Arya, R S Verma, Rohan C, Srikanth P, Rajashekharegowda M D, |
| 65. | 09-08-2019 | Machinability and Delamination studies on Glass fiber reinforced polymer matrix Composite cut by Abrasive water jet Machine
Abrasive water jet machining possesses inherent technological and manufacturing advantages unmatched by most machine tools. They are generally used in automotive, marine and aerospace industries for machining of composites. However, abrasive water jet cutting of GFRP laminates possesses several challenges, such as surface finish and delamination of the cut specimen.
Henceforth, more experimental work is needed to provide sufficient machinability databases for manufacturing industries. This paper presents an experimental study for cutting GFRP laminates. Different AWJM conditions including pressure, traverse speed and abrasive flow rate are analyzed using full factorial design of experiments. Machining process responses such as surface roughness (Ra), top and bottom kerf width, kerf taper, delamination of fibers have been evaluated using analysis of variance (ANOVA) technique. The optimum process parameters for AWJM of glass fiber reinforced polymers have been suggested.
Authors: Madhav Murthy, Wasif Wani, Prajwal, Dr.S Srinivas Link |
| 66. | 15-07-2019 | “Effect of Forward-Facing Cavity Geometry in High Enthalpy Flows”, Proceedings of the 32nd International Symposium on Shock Waves (ISSW32 2019), Research publishing Singapore, pp 295-301, July 2019. Authors: Sudarshan, B., Jagadeesh, G., and S. Saravanan Link |
| 67. | 15-07-2019 | “Effect of Energy Deposition Inside the Forward-Facing Cavity in a Hypersonic Flow.” Proceedings of the 32nd International Symposium on Shock Waves (ISSW32 2019), Research publishing Singapore, pp 1419-1425, July 2019. Authors: Sudarshan, B., Sneh Deep, Jayaram, V., Jagadeesh, G., and S. Saravanan Link |
| 68. | 03-07-2019 | “Feasibility studies on newly conceptualized Inter-shaft Squeeze Film Damper (ISSFD) Rings for Vibration Attenuation”, Sixth National Symposium on Rotor Dynamics, NSRD2019, July 2-3, 2019, CSIR-National Aerospace Laboratories, Bengaluru.
Part of the Lecture Notes in Mechanical Engineering book series (LNME) Springer 2019. 267-278.
https://doi.org/10.1007/978-981-15-5701-9_22 Authors: H.M.Shivaprasad, G.Giridhara, Ajit Kumar, Praveenkumar Kamanat, V. Arunkumar. Link |
| 69. | 03-07-2019 | A study on the effect of off-axis loading on the fatigue strength of FRPs using modeling techniques, Proc. 4th Indian Conference On Applied Mechanics, INCAM-2019, Indian Institute of Science, Bangalore Authors: Vishwas B Patil, Vinayak Hegde, Vishanth P, Vishwas M, Anil Chandra A R, M G Patil, Shivashankar R. Srivatsa Link |
| 70. | 03-07-2019 | “A study on the effect of off-axis loading on the fatigue strength of FRPs using modelling techniques ’’ Authors: Vishwas B Patil , Vinayak , Vishanth, Vishwas M, Anil Chandra, M G Patil, Shivashankar Link |
| 71. | 02-07-2019 | Experimental Investigation on the Effect of Housing Profile and its Relative Position on the Performance of Semi Active Journal Bearing Authors: G. Saravanakumar, L. Ravikumar, Raghu Yogaraju, V. Arun Kumar Link |
| 72. | 29-05-2019 | “Experimental Investigation on the Effect of Housing Profile and its Relative Position on the Performance of Semi Active Journal Bearing”, NSRD-2019, NAL, Bangalore. Authors: Raghu Yogaraju, L. Ravikumar, V. Arun Kumar and G. Saravanakumar, |
| 73. | 11-05-2019 | INTERNATIONAL CONFERENCE ON EMERGING
TRENDS IN ENGINEERING (ICETE-2019)
Study on sedimentation stability of Mahua and
Simarouba oils based magnetorheological fluids Authors: RAM ROHIT V Link |
| 74. | 22-02-2019 | Journal of Physics: Conference Series, Volume 1240, Authors: C. K. Mangrulkar, J. D. Abraham, A.S. Dhoble Link |
| 75. | 04-02-2019 | Optimized Additive Manufacturing Technology using Digital Twins and Cyber Physical Systems, International Conference on Remote Engineering and Virtual Instrumentation Authors: Arjun C C, Sreekanth N V |
| 76. | 04-02-2019 | A Skill Enhancement Virtual Training Model for Additive Manufacturing Technologies, International Conference on Remote Engineering and Virtual Instrumentation Authors: Arjun C C, Sreekanth N V |
| 77. | 11-01-2019 | “ Influence of MWCNT addition on mechanical properties of density graded E-glass fiber reinforced polyester resin composites ’’ Authors: Chethana K Y, Y S Rammohan , M G Patil, Lokesh G Link |
| 78. | 04-01-2019 | “Hardness Charecteristics of Grinding Wheel Using Al2O3 with boron Nitride, 2nd International Conference on Innovations in Mechanical Engineering (ICIME – 2019) Springer LNME Authors: Rudra Naik, Shivashankara, M.G Patil |
| 79. | 17-12-2018 | Godi, S. C., Ananda Prasanna, Pattamatta, A., and Balaji, C, “Heat transfer characteristics of a single row of three-dimensional wall jets,” 2nd National Aero Propulsion Conference, 17-19 December 2018, I.I.T. Kharagpur, West Bengal, India. Authors: Godi, S. C., Ananda Prasanna, Pattamatta, A., and Balaji, C |
| 80. | 01-12-2018 | Mathematical Modeling of dry Sliding Wear Behaviour of Stir – Squeeze cast Aluminium Matrix Composite Authors: V Bharathi, M Ramachandra, S Srinivas Link |