Publications
| # | Published Date | Details |
|---|---|---|
| 101. | 01-01-2018 | INVESTIGATION ON HARDNESS OF Al7075/Al2O3/SiCp HYBRID COMPOSITE USING TAGUCHI TECHNIQUE, Materialstoday: PROCEEDINGS, 5 (10), pp. 22447-22453, https://doi.org/10.1016/j.matpr.2018.06.614.
Authors: M RAVIKUMAR, HN REDDAPPA, R SURESH, M GANGADHARAPPA Link |
| 102. | 01-01-2018 | MECHANICAL AND WEAR CHARACTERIZATION OF Al6061 RED MUD COMPOSITES, Materialstoday: PROCEEDINGS, 5 (10), pp. 22384-22389, https://doi.org/10.1016/j.matpr.2018.06.606. Authors: M GANGADHARAPPA, HN REDDAPPA, M RAVIKUMAR, R SURESH Link |
| 103. | 27-12-2017 | “Numerical investigation of effect of intake valve closing time on common rail diesel engine fuelled with butanol-diesel blends” has been accepted for presentation in the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) during December 27-30, 2017 to be held at BITS-Pilani, Hyderabad Campus. Authors: Venkatesh T. Lamani, Shambhu Kumar Tati, Ajay Kumar Yadav, G. N. Kumar, |
| 104. | 27-12-2017 | Godi, S. C., Pattamatta, A., and Balaji, C, “Effect of the inlet geometry on the flow and heat transfer characteristics of three-dimensional wall jets,” 24rd National and 2nd ISHMT–ASTFE Heat and Mass Transfer Conference, 27-30 December 2017, BITS Pilani, Hyderabad, Telangana state, India. Authors: Godi, S. C., Pattamatta, A., and Balaji, C. |
| 105. | 15-12-2017 | INVESTIGATION ON SUBCOOLED FLOW BOILING HEAT TRANSFER TO WATER-ETHANOL MIXTURE, Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) Authors: Pushkar Kumar, B. G. Suhas and Sathyabhama Alangar Link |
| 106. | 17-08-2017 | Evaluation of Al7075 Reinforced with SiC for its Mechanical Properties & Surface Roughness by Drilling Authors: Parmesh Kumar, Vijay Kumar B P, RaghavendraJoshi, T H Manjunatha, R Suresh kumar Link |
| 107. | 10-07-2017 | “Numerical Analysis of Surface Heat Flux in a Forward-Facing Cavity.” 31st International Symposium on Shock Waves 2, Nagoya, Japan, pp. 795–806, July 2017. Authors: Sudarshan, B., and S. Saravanan Link |
| 108. | 21-04-2017 | “ Selection of Bonding Material for Manufacturing Grinding Wheels “ Authors: Shivashankara, Rudra Naik, M.G.Patil Link |
| 109. | 01-04-2017 | Performance enhancement of a single basin solar still integrated with evacuated tubes using thermal storage beds: An experimental study, International Conference on Frontiers in Engineering, Applied Science and Technology,31st March – 1st April, NIT- Trichy, ISBN: 978-81-908388-8-7 Authors: Praveen T. Hunashikatti, Dr. Suresh Ramaswwamyreddy, Prathima B and Amar |
| 110. | 31-03-2017 | Analysis of temperature distribution on disk brake subjected to free and forced convection, International Conference on Frontiers in Engineering, Applied Science and Technology,31st March – 1st April, NIT- Trichy, ISBN: 978-81-908388-8-7 Authors: Akshay Kumar, Ganesh Prabhu, Chetan Kamath K, Praveen T. Hunashikatti |
| 111. | 02-03-2017 | Investigation of heat transfer coefficient and Bubble dynamics of ethanol during subcooled flow boiling”, 6th International Engineering Symposium, Kumamoto University, Japan held on December 27-30, 2017. Authors: Suhas B.G and Sathyabhama.A |
| 112. | 01-03-2017 | TRIBOLOGICAL BEHAVIOUR OF Al6061-NANO RED MUD PARTICULATE METAL MATRIX COMPOSITE BY TAGUCHI’S TECHNIQUES, International Journal of Engineering Sciences & Management Research, Authors: M GANGADHARAPPA, HN REDDAPPA, M RAVIKUMAR, R SURESH, MADEVA NAGARAL Link |
| 113. | 01-03-2017 | EFFECT OF MECHANICAL AND WEAR BEHAVIOR ON AL7075/Al2O3/SiCp REINFORCED ALUMINUM MATRIX COMPOSITES (AMC), INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, ICAMS-2017, pp. 94-101. Authors: M. RAVIKUMAR, HN REDDAPPA, M SREENIVASA REDDY, R SURESH |
| 114. | 29-12-2016 | “Performance characteristics of a Semi Active Journal Bearing for differentOvality Ratio”, National Tribology Conference 2016, “NTC2016”, December 2016, IIT (BHU) Varanasi, India. Authors: Raghu Yogaraju, L. Ravikumar, V. Arun Kumar and G. Saravanakumar, |
| 115. | 16-12-2016 | Numerical investigation of forced convective heat transfer coefficient of water-ethanol mixture in a horizontal rectangular channel”, Proceedings of the 6th International and 43rd national conference on Fluid Mechanics and Fluid Power, MNNITA, Allahabad, Uttar Pradesh held on December 15-17, 2016. Authors: Suhas B.G and Sathyabhama.A |
| 116. | 11-11-2016 | Godi, S. C., Pattamatta, A., and Balaji, C, “Transient heat transfer measurements for planar and circular wall jets using liquid crystal thermography,” ASME’s IMECE., 11-17 November 2016, Phoenix, Arizona, U.S.A. Authors: Godi, S. C., Pattamatta, A., and Balaji, C, |
| 117. | 02-09-2016 | Evaluation of Corrosion Property of Aluminium-Zirconium Dioxide (AlZrO2) Nanocomposites Authors: M Ramachandra, G Dilip Maruthi, R Rashmi Link |
| 118. | 07-07-2016 | Large adiabatic temperature change in magnetoelastic transition in Ni {sub 50} Mn {sub 35} Cr {sub 2} Sn {sub 13} Heusler alloy of granular nanostructure Authors: HR Prakash, SK Sharma, S Ram, S Chatterjee |
| 119. | 15-06-2016 | “Selection of Abrasive Materials for Manufacturing Grinding Wheels” ICAMA 2016, Materials Today: Proceedings 5 (2018) 2860–2864 Authors: Rudra Naik, Swagata Bhowmik |
| 120. | 21-05-2016 | “Experimental Investigation of Microstructural Characteristics and Tribological Properties of Al-Si Alloys Modified under the Influence of Mechanical Mold Vibration” Proceedings of 72nd World Foundry Congress, at Port Messe, Nagoya Japan, 21-25 May 2016. Authors: Vardhaman S Mudakappanavar and H M Nanjundswamy |