Publications
| # | Published Date | Details |
|---|---|---|
| 121. | 23-04-2016 | “Feasibility and Performance Studies of a Semi Active Journal Bearing”, 1 st Global Colloquium on Recent Advancements and Effectual Researches in Engineering, Science and Technology - RAEREST 2016, SJCET-Palai, Kerala, April 22nd & 23rd, 2016. Authors: Raghu Yogaraju, L. Ravikumar, V. Arun Kumar and G. Saravanakumar, |
| 122. | 22-04-2016 | “Comparative Experimental analysis of Load carrying capability of Air foil thrust bearing for different configuration of foil assembly”, Presented in the International conference on Recent Advancements and Effectual Researches in Engineering, Science & Technology (RAEREST 2016) held at ST.JOSEPH'S COLLEGE OF ENGINEERING & TECHNOLOGY, PALA, Kerala, during 22-23 April 2016. Authors: Ravikumar R N,Rathanraj K JandArunKumar.V |
| 123. | 02-04-2016 | Magnetic properties in MnBi alloy of small crystallites for permanent magnet devices Authors: SR S. K. Sharma, H. R. Prakash |
| 124. | 24-02-2016 | CFD simulation of a common rail diesel engine with biobutanol-diesel blends for various injection timings, Biofuels and Bioenergy: International conference and Exhibition, 23rd-25th February, 2016 in MANIT, Bhopal, Madhya Pradesh. Authors: Venkatesh T. Lamani, Ajay Kumar Yadav, Kumar G.N, |
| 125. | 08-01-2016 | "Effect of Autonomy - Positive Outcomes in Teaching Learning Process, A Case Study", Third International Conference on Transformations in Engineering Education Authors: Arjun C C, Madhav Murthy |
| 126. | 28-12-2015 | ‘Numerical Investigation of Heat Transfer and Damage Progression during Total Instantaneous Blockage in a Nuclear Fuel Subassembly’, 23rd National and 1st ISHMT-ASTFE Heat and mass transfer Conference, December 2015,LPSC, ISRO, Trivandrum, India. Authors: Ravi, L., Velusamy, K. |
| 127. | 17-12-2015 | Godi, S. C., Chinage Sampat Kumar, Pattamatta, A., and Balaji, C, “Transient heat transfer measurements for single round impinging orifice and nozzle type jet using liquid crystal thermography,” 23rd National and 1st ISHMT–ASTFE Heat and Mass Transfer Conference, 17-20 December 2015, Thiruvananthapuram, Kerala, India. Authors: Godi, S. C., Chinage Sampat Kumar, Pattamatta, A., and Balaji, C |
| 128. | 17-12-2015 | “Synthesis and Analysis of Geared Five Bar Mechanism for Ornithopter Applications”, 2nd International and 17th National Conference on Machines and Mechanisms iNaCoMM2015-218,IIT Kanpur, Dec 17, 2015. Authors: Sandhya R, Mahesh Kadam, Dr.G.Balamurugan, H K Rangavittal |
| 129. | 08-12-2015 | Investigation of Core Damage Progression during Total Instantaneous Blockage in SFR Fuel Subassembly, Proceedings of the CANDU Safety Association for Sustainability and New Horizons in Nuclear Reactor Thermal-Hydraulics and Safety, December 8-11, 2015, BARC, Anushaktinagar, Mumbai, India. Authors: Ravi, L., Velusamy, K., Chellapandi, P |
| 130. | 01-06-2015 | HARDNESS AND MICRO-STRUCTURAL STUDY OF INERTIA FRICTION WELDING OF DISSIMILAR HIGH TEMPERATURE ALLOYS, International Journal of Engineering Research & Technology (IJERT), 3 (17), pp. 1-5. Authors: M RAVIKUMAR, HN REDDAPPA, M SREENIVASA REDDY Link |
| 131. | 26-04-2015 | Treatment of Reverse Osmosis Rejected Water Using Solar Energy – A Case Study, Proceedings of the International Conference on Micro Perspectives for Decentralized Energy Supply, 23- 25 April, 2015, BMS College of Engineering, Bangalore, India. Authors: Praveen T. Hunashikatti, Prathima B, Manjunath Kalmath, K.R. Suresh |
| 132. | 05-03-2015 | Effect of exhaust gas recirculation rate on a single cylinder four stroke CRDI engine using CFD modeling, 4th International Engineering Symposium (IES2015), Kumamoto University, Japan, March 4th-6th, 2015. Authors: Venkatesh T. Lamani, Ajay Kumar Yadav, G.N. Kumar, |
| 133. | 01-02-2015 | Prediction of Sliding Wear behavior of TiO2-30wt% Inconel718 coated Al6061 using Artificial Neural Network, NTC 2015, Feb , PESIT, Bangalore Authors: C.S.Ramesh, R.Suresh Kumar, G.Ugrasen, Pavan Kumar B K , Shivaramakrishna |
| 134. | 01-01-2015 | Hardness and Wear Resistance of ZrO2 Nano Particle Reinforced Al Nanocomposites Produced by Powder Metallurgy Authors: M Ramachandra, A Abhishek, P Siddeshwar, V Bharathi Link |
| 135. | 30-12-2014 | “Feasibility Studies of Semi-Active Journal Bearing” National Tribology
Conference, NTC-201’, PESIT, December 2014. Authors: Raghu Yogaraju, L. Ravikumar, V. Arun Kumar and G. Saravanakumar, |
| 136. | 17-12-2014 | Numerical Investigation of Damage Propagation within a Nuclear Fuel Subassembly Due to Flow Blockage’, Proceedings of International Conference on Computational Methods in Engineering and Health Sciences, December 17-19, 2014, Manipal Institute of Technology, Manipal, India. Authors: Ravi, L., Velusamy, K., Chellapandi, P |
| 137. | 12-12-2014 | Transient Natural Convection in a Heat Generating Fuel Pool and Damage Propagation in Core during Flow Blockage in a Single Fuel Subassembly’, Proceedings of the 5th International and 41st National Conference on Fluid Mechanics and Fluid Power December 12-14, 2014, IIT Kanpur, India. Authors: Ravi, L., Velusamy, K., Chellapandi, P |
| 138. | 12-12-2014 | Influence of operating parameters on the battery module cooling in hybrid electric vehicles”, Proceedings of the 5th International and 41st National conference on Fluid Mechanics and Fluid power, IIT- Kanpur, Uttar Pradesh held on December 14-16, 2014. Authors: Suhas B.G and Sathyabhama |
| 139. | 14-11-2014 | Ïmplementation of e-Commerce for enhanced machine utilization: A sustainable business model", International Conference on Sustainable Business Models in the Emerging Global Economy, 13-14 Nov 2014, Bangalore Authors: Sreekanth N V, Arjun C C, Dr. K Guruprasad |
| 140. | 13-11-2014 | Sustainability in Mechanical Engineering Industry- An Entrepreneur's Perspective, International Conference on Sustainable Business Models in the Emerging Global Economy, 13-14 Nov 2014, Bangalore India Authors: Arjun C C, Sreekanth N V, Dr. K Guruprasad |