Publications
| # | Published Date | Details |
|---|---|---|
| 161. | 25-02-2013 | ”Analysis and Optimization of MEMS Electrostatic Actuator.” International Conference on EMERGING TECHNOLOGIES:MICRO TO NANO (ETMN-2013) held at BITS,PILANI, Goa , India, 24th AND 25thFebruary 2013. P110. 11. 154541302. Authors: Srikanth K M, J. Sharana Basavaraja, B.S. Suresh, H.K. Rangavittal |
| 162. | 07-01-2013 | Slurry erosive wear behaviour of Copper plasma sprayed with Titania, RAMPT 13, January 07 – 09, 2013, National Engineering College, K.R. Nagar, Kovilpatti, Tamil Nadu, INDIA. Authors: C.S Ramesh, R. Suresh Kumar |
| 163. | 07-01-2013 | Slurry erosive wear behaviour of Copper plasma sprayed with Titania, RAMPT 13, January 07 – 09, 2013, National Engineering College, K.R. Nagar, Kovilpatti, Tamil Nadu, INDIA Authors: C.S. Ramesh, R. Suresh Kumar |
| 164. | 12-12-2012 | “ Polishing Characteristics of Magnetic Abrasives Produced by Mechanical Alloying” Authors: M.G.Patil, K.Chandra & P.S.Misra Link |
| 165. | 13-07-2012 | Influence of Tool Wear during Hard Turning of hard Chrome Plated Surfaces, "International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies (ICCOMIM-2012), 11-13 July, 2012" Authors: Sreekanth N V, Mohandas K N, C S Ramesh, N Balashanmugam |
| 166. | 18-06-2012 | Frequency Domain based Damage Index for Structural Health Monitoring using Laser Vibrometry Authors: G. Giridhara, S. Gopalakrishna, Massimo Ruzzene, Sathya Hanagud and V. Sharma Link |
| 167. | 11-05-2012 | Performance and emission characteristics of a single cylinder four stroke spark ignition engine operating with Hydrogen Blends”. Proceedings of National Conference on Innovations and Emerging Trends in Mechanical Engineering, Nagarajuna College of Engineering and Technology, Bangalore held on May 11, 2012. Authors: Suhas B.G, Shivaprasad K.V, Kumar G.N |
| 168. | 03-05-2012 | Artificial Neural Network Model for Prediction of Sliding Wear of Mild Steel Coated with Al 20 wt% TiO2, ICRTCSE 2012, Apollo Engineering College, Mevaloorkuppam, Valarpuram, Sriperumbudur, Kanchipuram – 602105. Tamil Nadu, South India. Authors: R. Suresh Kumar |
| 169. | 03-05-2012 | Artificial Neural Network Model for Prediction of Sliding Wear of Mild Steel Coated with Al 20 wt% TiO2, ICRTCSE 2012, Apollo Engineering College, Mevaloorkuppam, Valarpuram, Sriperumbudur, Kanchipuram – 602105. Tamil Nadu, South India Authors: R. Suresh Kumar |
| 170. | 04-10-2011 | Optimization of Green sand Mold Properties Using Different Additives. Authors: K. Radhakrishna Tataram K Chavan, |
| 171. | 19-08-2011 | Dry sliding wear study of mild steel coated with inconel 718 – A taguchi approach, ICAM 2011, BTLIT, Bangalore. Authors: R. Suresh Kumar |
| 172. | 19-08-2011 | DRY SLIDING WEAR STUDY OF MILD STEEL COATED WITH INCONEL 718– A TAGUCHI APPROACH
ICAM 2011, BTLIT, Bangalore Authors: R. Suresh Kumar |
| 173. | 15-05-2011 | Study of Sliding Wear Behavior of INCONEL718 Coatings on Mild Steel, 2011 STLE Annual Meeting & Exhibition, Atlanta, Georgia. Authors: C.S Ramesh, R. Suresh Kumar, R. Keshavamurthy Link |
| 174. | 15-05-2011 | Study of Sliding Wear Behavior of INCONEL718 Coatings on Mild Steel, 2011 STLE Annual Meeting & Exhibition, Atlanta, Georgia Authors: C.S.Ramesh, R Suresh Kumar, R.Keshavamurthy |
| 175. | 28-12-2010 | “Non-linear Finite Element Analysis of pin joints in composite plates ” AIM Engg 2011, January 3-5, 2011, National Conference on Advances in Mechanical Engineering held at Manipal – 576104, Karnataka, India Authors: Kashinath S.V.H., Rangavittal H.K., Suresh B.S |
| 176. | 27-12-2010 | .”Boundary Element Solutions For Pin Joints In Orthotropic Plate Under Pin Load Using Inverse Formulation. December 27 - 29, 2010,ICTACEM 2010,Fifth International Conference on Theoretical & Applied,Computational and Experimental Mechanics held at IIT,Kharagpur. Authors: 20. Rangavittal H.K., Naidu A.C.B., Badari Narayana K.and Suresh B. S |
| 177. | 10-12-2010 | Numerical Investigation of Film Cooling of a Flat plate using Converging Slot Hole,
34th National Conference on Fluid Mechanics & Fluid Power Authors: Devaraj K, Sitharam N |
| 178. | 26-11-2010 | “Influence of Axis Ratio on the Stresses around an Elliptical Cutout and Inclusion in a Filament Wound Fibre Reinforced Plastic Pressure Vessel “ICTT 2010 ,An International Conference on Technological Trends (ICTT-2010) held at College of Engineering, Thiruvananthapuram 25-27 November 2010. Authors: B.S.Suresh, , H.K. Rangavittal, J.Sharana Basavaraj and Mohammed yakub S.L |
| 179. | 13-10-2010 | “Three dimensional Non-linear contact stress analyses of pin joints in composite plates” NAME 2004,12-14,Oct.2010,JNNCE,Shimoga. Authors: Kashinath S.V.H., Rangavittal H.K., Suresh B.S |
| 180. | 13-10-2010 | ”Effect Of Axis Ratio On The Stresses Around An Elliptical Cutout In Laminated Composite Pressure Vessel”, NAME 2004,12-14,Oct.2010,JNNCE,Shimoga.
Authors: J.Sharana Basavaraj1, H.K. Rangavittal, B.S.Suresh, Mohammed yakub S.L |