# Published Date Details
181.21-05-2010Analysis Of Stresses Around Elliptical Cutouts And Inclusions In Laminated Composite Cylindrical Shells” International conference on "Frontiers in Mechanical Engineering-FIME-2010" held at NITK, Suratkal ,May (20-22),2010, DA 126.
Authors: Gururaj D, Rangavittal H.K. and Suresh B.S.
182.20-05-2010 “Experimental investigation on characterisation of heat pipe”. International conference in Frontiers in mechanical Engg. 20-22 May 2010. NITK Surathkal.
Authors: Rudra Naik, Pundarika G
183.20-05-2010“Boundary Element Solutions For Pin Joints In Orthotropic Plate Under Bypass Load Using Inverse Formulation. International conference on "Frontiers in Mechanical Engineering-FIME-2010" held at NITK, Suratkal ,May (20-22),2010, DA 532.
Authors: H.K.Rangavittal,A.C.B.Naidu,,K.BadariNarayana and B. S.SURESH
184.20-09-2009"Prediction of Longitudinal Distortion in a T-Section Using SYSWELD Simulation Software", Recent Advances in Welding (RAW-2009), September 2009, PESIT, Bengaluru.
Authors: Narahari, Dr. V. P. Raghupathy, Sri. Kumarswamy B Hosamath
Link
185.05-03-2009Design AND DEVELOPMENT OF POWERRECIRCULATING Gear TEST RIG
Authors: J G,S H K, A R R. Prakash H R
186.14-08-2008’ A Review of Techniques for the Analysis of Fastener Joints in Composite Structures’, National conference on Emerging Trends in Mechanical Engineering ETIME-2008,28-29,August 2008,BMSCE,Bangalore.
Authors: Rangavittal H.K., Suresh B.S.,Naidu A.C.B.and Badari Narayana K.
187.01-08-2008National conference: “ Non-linear Finite Element Analysis of Thin Membrane Structures” in National Conference – ETIME,BMSCE, 2008
Authors: Shashiraj , B.S.Suresh and K.V.Muralidhar
188.04-06-2008INFLUENCE OF HIGH PROFILE SHIFT IN IMPROVING SURFACE DURABILITY
Authors: Sachinanda HK. LaxmanNaik L, GONSALVIS J., PRAKASH H. R.
189.06-03-2008FOUR-SQUARE GEAR TESTING RIG- DESCRIPTION AND POSSIBILITIES
Authors: PHR Joseph Gonsalvis .
190.23-01-2008 “Thermodyanamic Analysis Of Gas Turbine Cogeneration System” International conference on recent development in mechanical engineering. 23-25 Jan 2008 SUSCET, Mohali, Chandighar
Authors: Rudra Naik, Bheemsha, Pundarika.G and Ramesh Nayak
191.23-01-2008 Design Of Heat exchanger For Thermoacoustic Refrigerator International conference on recent development in mechanical engineering. 23-25 Jan 2008 SUSCET, Mohali, Chandighar.
Authors: Rudra Naik, Bheemsha.,Pundarika.G, and Suresh S.M.
192.06-12-2007 “Production Of Jatropha Oil And Performance Characteristics of A Twin Cylinder Diesel Engine Using Jatropha-Diesel Blend. International conference on I.C. Engines and combustion Dec 6-9 JNTU, Hyderabad
Authors: RudraNaik, RameshNayak, Bheemsha.,Pundarika.G
193.01-12-2007“Effect of heat treatment on mechanical and wear characteristics of Al6061-SiC metal matrix composites” in International conference on advanced materials and composites held in Thiruvanathapuram, Dec 2007.
Authors: N.R. Prabhu Swamy, C.S. Ramesh and T. Chandrashekar,
194.01-03-2007EXPERIMENTAL INVESTIGATIONS OF POWER LOSS IN ALTERED TOOTH-SUM GEARING
Authors: . Prakash H. R, Sachidananda H.K.,Gonsalvis .
195.27-07-2006ALTERED TOOTH-SUM GEARING FOR HIGH CONTACT RATIO
Authors: Prakash HR, Sachidananda H.K.,Gonsalvis .
196.06-02-2006Evaluation of mechanical and wear properties of Al-Si (12.2%)-Graphite metal matrix composite synthesized using stir-casting method
Authors: M Ramachandra, K Radhakrishna
Link
197.06-02-2006Production, evaluation and comparison of mechanical, wear, and corrosion properties of Al-Flyash1 and Al-Flyash2 metal matrix composite
Authors: M Ramachandra, K Radhakrishna
Link
198.14-12-2005ALTERED TOOTH-SUM GEARING FOR HIGHER EFFICIENCY
Authors: Prakash HR, Joseph Gonsalvis .
199.28-12-2004“Design and Theoretical construction of Thermoacoustic Refrigeration” Intenational Conference on theoretical’, Applied,Computational and Experimental mechanics. Dec 28-30 2004. IIT, Kharagpur
Authors: Rudra Naik., Bheemsha., Hithesh Shah., Pundarika G.
200.20-12-2004.”Effect of Moisture on the Mechanical properties of Glass Fiber reinforced Polymer matrix Woven fabric Material”ISRS-2004,December 20 -22 ,IIT,Madras,Chennai.
Authors: M.Raghavendra, C.M.Manjunatha, M,Jeeva Peter,C.R.Venugopalan and Rangavittal H.K.