Publications
| # | Published Date | Details |
|---|---|---|
| 41. | 17-12-2020 | “CFD Analysis of N- Butanol - Diesel Blends and Low-Temperature Combustion in CRDI Engine ” 3rd National Aerospace Propulsion Conference (NAPC 2020), Authors: Rudra Naik, Venkatesh T Lamani, , Ravi L, L. Ravikumar, and Bheemsha Arya, |
| 42. | 17-12-2020 | STUDY THE IMPACT OF OPERATIONAL PARAMETERS ON INTERFACE TEMPERATURE DURING ROTARY DRILLING, Materialstoday: PROCEEDINGS, https://doi.org/10.1016/j.matpr.2020.12.760 Authors: KR VARADARAJA, S VIJAY KUMAR, C MANJUNATH, M RAVIKUMAR Link |
| 43. | 07-12-2020 | Experimental studies on Performance of Air foil thrust bearing load capabilities considering different foil materials” at Virtual International Conference on Advances in Mechanical Engineering Sciences & Management (ICAMESM-2020), from 7th to9th of December 2020,DayanandaSagar College of Engineering, Bangalore. Authors: Ravikumar R N1,a) *, Vardhaman S.Mudakappanavar2,b) ,Tataram K Chavan3,c)Rathanraj K J4,d) |
| 44. | 07-12-2020 | Experimental studies on Performance of Air foil thrust bearing load capabilities considering different foil materials.
International Conference on Advances in Mechanical Engineering Sciences & Management (ICAMESM-2020),
D S C E, Bangalore,
Authors: R N Ravikumar, Vardhaman S. Mudakappanavar, Tataram K. Chavan and K J Ratanraj |
| 45. | 11-11-2020 | Evaluation and characterization of phenalkamine resin based bio-composite laminates with silver nano particles as reinforcing material, AIP Conference Proceedings Authors: S. Akash, M. Ramachandra, L. Ravi Kumar, and S. Avinash Link |
| 46. | 31-10-2020 | Hemant Naik., Sangamesh C. Godi., Harikrishanan, and Shaligram Tiwari, “Irreversibility Analysis of Flow past Curved Rectangular Winglet Placed in a Channel,” 2nd virtual National Conference, 31st October-2nd November 2020, N.I.T. Jamshedpur, India. Authors: Hemant Naik., Sangamesh C. Godi., Harikrishanan, and Shaligram Tiwari |
| 47. | 08-10-2020 | Modal Mapping Using Machine Learning, Proceedings of National Conference on Innovative Processing Methods for Synthesizing Advanced Structural and Functional Materials, NEC-IPSASFM-2020, HKBK College of Engineering, Bangalore Authors: Shivakumar V Bilagi, Shivashankar R. Srivatsa, Vijaykumar Walikar, Shreyas Valale |
| 48. | 05-10-2020 | Fabrication and bonding behavior of phenalkamine resin based hybridized silver nano bio-composite laminates with less epoxy content Authors: S Akash, M Ramachandra, L Ravi Kumar, S Avinas Link |
| 49. | 05-10-2020 | COMPARATIVE STUDY OF EFFECT OF SISAL FIBRES IN POWDER AND SHORT FORM ON THE MECHANICAL PROPERTIES OF POLYPROPYLENE, AIP Conference Proceedings, AIP Conf. Proc. 2274, 030014, https://doi.org/10.1063/5.0022594. Authors: NARAYAN NAYAK, HN REDDAPPA, VIJENDRA BHAT, M RAVIKUMAR Link |
| 50. | 07-09-2020 | Effect of carbon nanotube (CNT) additions in Cr3C2-25%NiCr coatings on microstructural and mechanical properties Authors: Manjunatha Kuruba , Giridhara Gaikwad, Jegadeeswaran Natarajan Link |
| 51. | 19-08-2020 | ANNUAL TRANSACTIONS OF THE NORDIC RHEOLOGY SOCIETY, VOL. 28, 2020
Frequency Sweep Response of a Simarouba Based Green
Magneto-Rheological Fluid Authors: RAM ROHIT V Link |
| 52. | 11-07-2020 | A STUDY ON THE POTENTIAL USE OF SOYBEAN AND COCONUT OIL AS CARRIER FLUIDS FOR SMART MATERIAL AND THEIR APPLICATIONS
The 5th International Conference on “Advanced Research in Mechanical, Materials and Manufacturing Engineering Authors: RAM ROHIT V Link |
| 53. | 06-07-2020 | “ Effect of collapse trigger mechanism on the energy absorption capability of GFRP tubes ’’ Authors: K. Y. Chethana , Y S Rammohan , M G Patil Link |
| 54. | 10-06-2020 | 1. NUMERICAL SIMULATION OF FLOW OVER NACA-0012 AIRFOIL PITCHING AT LOW FREQUENCIES USING SU2.
The 1st Annual SU2 Conference (Virtual), June 10-12, 2020, held at San Francisco, CA, USA
AASHA G. C.1 , VISHAL RAJ2 , RAMESH KOLLURU 3 , RAMESH. M. CHALKAPURE 4 , ROHAN SRIKANTH 5 , AJIT H. A 6.
2. NUMERICAL ANALYSIS OF FLOW OVER A SYMMETRIC AIRFOIL PITCHING AT LOW FREQUENCIES.
The 15th OpenFOAM Workshop (OFW15), June 22-25, 2020, held at Washington DC, USA.
ROHAN SRIKANTH 1, RAMESH KOLLURU 2 , RAMESH. M. CHALKAPURE 3
,AASHA.G.C 4 , VISHAL RAJ 5 , AJIT.H.A 6
Authors: AASHA G. C.1 , VISHAL RAJ2 , RAMESH KOLLURU 3 , RAMESH. M. CHALKAPURE 4 , ROHAN SRIKANTH 5 , AJIT H. A 6. |
| 55. | 08-06-2020 | Investigation of copper-water loop heat pipe for different filling ratios” IOP Conf. Series: Materials Science and Engineering 872 (2020) 012070. Authors: Rudra Naik, Atmanand Anikivi, and K Rama Narasihma Link |
| 56. | 02-06-2020 | Ganesan K., Gupta A. (2021) Human-Centric Optimal Design of Biomimetic Exosuit for Loaded Walking: A Simulation Study. In: Sen D., Mohan S., Ananthasuresh G. (eds) Mechanism and Machine Science. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4477-4_35 Authors: Ganesan K., Gupta A Link |
| 57. | 28-02-2020 | Study Of Dry Sliding Wear Behaviour Of Eutectic Aluminium-Silicon Alloy Solidified Under The Influence Of Mechanical Mold Vibration.
2nd International Conference on advances in Mechanical Engineering science (ICAMES-2K20), PES MANDYA, Authors: Vardhaman S. Mudakappanavar and H M Nanjundaswamy |
| 58. | 16-01-2020 | “Estimation and Comparison of Welding Responses using MRA, GMDH and ANN Technique of Al6061 and Al7075 Material in FSW”, Proceedings of the ASME 2019, International Mechanical Engineering Congress and Exposition (IMECE-2019), November 11-14, 2019, Salt Lake City, UT, USA. Authors: Ugrasen Gonchikar, Holalu Venkatadasu Ravindra, Prathik Jain Sudhir, Umeshgowda Bettahally Mahadevegowda, Shankarnarayan Maskibail Suresh |
| 59. | 09-01-2020 | The purpose of this study is to understand how each customer, groups or organisations choose, buy and discard ideas, goods, and services to satisfy what they need and what they actually want. This applies to the behaviours and the factors behind the actions of the customers on the market. A single app for ordering from a wide scope of restaurants, food tech has gotten well known over these years. This pattern has changed the outlook of customers. There are wide varieties of restaurants currently providing the benefits, options and best offers at a reasonable cost. This, has extended their everyday business, seeing a boom in online framework . The online delivery system provides a menu online with the assistance of applications like Zomato, Swiggy and Uber Eats, Fasoos etc. From this research an attempt has been made to understand the shift of customer's behaviour from dining in at restaurants to ordering food online, and various kinds of applications that satisfies consumers and delights them. The prime aim of the study is to understand how different parameters influence the purchase behaviour of the consumers. The research takes both quantitative approach and qualitative approach to the study.
Keywords : Online Delivery, Dine In, fast food delivery, restaurants, technology
Authors: Madhav Murthy, Shivam Dhingra, Sohail Saleem, Prajwal K, Manujith P Link |
| 60. | 01-01-2020 | "Effect of high velocity oxy fuel thermal spray coating on mechanical and tribological properties of materials"-A review
Materials Today: Proceedings Authors: G.padmavathi,B.N.Sarada,S.P Shanmuganathan,B.V.Padmini,N.Mohan Link |