Publications
| # | Published Date | Details |
|---|---|---|
| 181. | 14-10-2020 | "Experimental Investigation on the Effect of Housing Profile and its Relative Position on the Performance of Semi Active Journal Bearing", Lecture Motes in Mechanical Engineering, Springer, 2020, pp: 307-316. Authors: G. Saravanakumar, L. Ravikumar, Raghu Yogaraju, V. Arun Kumar Link |
| 182. | 14-10-2020 | “Experimental Performance Evaluation of Thermoacoustic Refrigerator made up of Poly-Vinyl Chloride for different Parallel Plate Stacks using Air as a working
medium” Materials Today Proceedings, Elsevier, Volume 22, Part 4, 2020, Pages 2160-2171. Authors: Shivakumara N V, Bheemsha Arya, |
| 183. | 01-10-2020 | Godi, S. C., Pattamatta, A., and Balaji, C. (2020). Heat transfer from a single and row of three-dimensional wall jets-A combined experimental and numerical study. International Journal of Heat and Mass Transfer, 159, 119801. . (Impact factor: 4.947) Authors: Godi, S. C., Pattamatta, A., and Balaji, C. Link |
| 184. | 01-10-2020 | Prabhu Swamy N R , V Bharathi , Ramji B R , S Srinivas, Depth of Penetration and Surface Roughness Analysis of Al6061 cut by Abrasive Water Jet, Solid State Technology, Vol. 63 No. 2s (2020) , October 2020, 3907 – 3914, ISSN 0038111X. Authors: Prabhu Swamy N R , V Bharathi , Ramji B R , S Srinivas, Link |
| 185. | 12-09-2020 | "Effect of the axial cavity with an opposing high-pressure jet combination in a Mach 6 flow condition,” Acta Astronautica 178 (2021) 335-348, 2020.
Authors: B Sudarshan, Srisha M.V. Rao, G. Jagadeesh, S. Saravanan Link |
| 186. | 07-08-2020 | Study of dry sliding wear behavior of eutectic Aluminum-Silicon Alloy solidified under the influence of mechanical mold vibration. Authors: Vardhaman. s. Tataram K Chavan |
| 187. | 08-07-2020 | Study Of Dry Sliding Wear Behaviour Of Eutectic Aluminium-Silicon Alloy Solidified Under The Influence Of Mechanical Mold Vibration.
Journal Of Critical Reviews, ISSN- 2394-5125, VOL 7, ISSUE 14, 2020, 2622-2625.
Authors: Vardhaman S Mudakappanavar ,H M Nanjundaswamy, R N. Ravikumar and Tataram K Chavan Link |
| 188. | 05-07-2020 | "Theoretical Formulation of the Thermodynamic Properties of Ammonia-Water and Ammonia-Water-Lithium Bromide Solutions", International Journal of Recent Technology and Engineering (IJRTE), Blue Eyes Intelligence Engineering and Sciences Publication, Volume-9 Issue-2,683-687, DOI:10.35940/ijrte.B3850.079220 Authors: Suhas B.G and Kavadiki Veerabhadrappa Link |
| 189. | 17-06-2020 | “Performance Evaluation of 10W Cooling Power Thermoacoustic Refrigerator with Spiral Stacks using Air and Helium as Working Fluids” Shivakumara N V and Bheemsha Arya 2020 Eng. Res. Express 2 015032. Authors: Shivakumara N V, Bheemsha Arya, |
| 190. | 09-06-2020 | Machinability and Delamination Studies on Glass Fiber Reinforced Polymer Matrix Composite Cut by Abrasive Water Jet Machine, Solid State Phenomena, ISSN: 1662-9779, V305, pp 122-128 Authors: Prajwal.H.V, Wasif Mumtaz Wani, Madhav Murthy, S.Srinivas, Link |
| 191. | 20-05-2020 | “Prediction of machining characteristics of Abrasive Water Jet Machined Al7075-TiB2 In-situ composite”, Icon AMMA-2018, Materials Today: Proceedings, Vol. 24, 2020, pp. 851-858. Authors: Kavya J T, Keshavamurthy R, Pradeep Kumar G S, Ugrasen G and Manjoth S |
| 192. | 30-03-2020 | Characterization of Hemp/Glass Reinforced Epoxy Hybrid Composites with Filler Material for the Engineering Application,International Journal of Recent Technology and Engineering (IJRTE)
ISSN: 2277-3878, Volume-8 Issue-6 March 2020
Authors: K.G. Prakash, Ranga Vittal H. K., A. Thimmana Gouda Link |
| 193. | 18-03-2020 | Estimation and Comparison of Electrode Wear and AE Parameters of Titanium and Stavax Materials in Wire Electric Discharge Machining using ANN”, Studies in Indian Place Names, ISSN: 2394-3114, Vol 40, Issue 40, March 2020, pp. 1589-1596. Authors: G Ugrasen, Prathik Jain S and H V Ravindra |
| 194. | 10-03-2020 | Microstructure and Dry sliding Wear Behaviour Of LM6 Alloy Solidified Under The Influence Of low Frequency Mold Vibration, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 2, Apr 2020, 411–420.
ISSN (P): 2249–6890; ISSN (E): 2249–8001 Authors: Vardhaman S Mudakappanavar and H M Nanjundaswamy Link |
| 195. | 29-02-2020 | Experimental investigations on depth of penetration and surface integrity in AZ91/Al2O3 nano-composites cut by abrasive water jet. Int J Adv Manuf Technol (2020) Authors: Niranjan, C.A., Srinivas, S. & Ramachandra, M |
| 196. | 19-02-2020 | Experimental investigations on depth of penetration and surface integrity in AZ91/Al2O3 nano-composites cut by abrasive water jet
The International Journal of Advanced Manufacturing Technology volume 107, pages747–762(2020) Authors: C. A. Niranjan, S. Srinivas & M. Ramachandra Link |
| 197. | 27-01-2020 |
"Fluidity characteristics of LM6/graphite particulate composite " TEST ENGINEERING AND MANAGEMENT
Volume 82Page Number: 5394-5401 Publication Issue:January-February 2020;ISSN: 0193-4120 Page No. 5394-5401
Authors: Sharath Kumar R ,Sarada B. N, P. L. Srinivasa Murthy, Abhishek Link |
| 198. | 24-01-2020 | EXPERIMENTAL INVESTIGATION OF FLUIDIC THRUST VECTORING BY SHOCK VECTOR CONTROL OF AN IDEAL CONTOUR NOZZLE
ISSN No.: 2454- 2024 (online)
Paper Id: IJTRS-V4-I12-018 Volume V Issue I, January 2020 Authors: Akshay S N1, Mullangi Kalyan2, Sreeharsha S3, Yadala Sandeep Kumar4, Ramesh M Chalkapure5 |
| 199. | 01-01-2020 | Design, Optimization and Calibration of 6-Component External Wind Tunnel Balance”, International Journal of Scientific & Engineering Research, Volume 11, Issue 1, January-2020 ISSN 2229-5518. Authors: Rajkumar Khot, S B Kandagal, J Sharana Basavaraja Link |
| 200. | 01-01-2020 | Study Of Dry Sliding Wear Behaviour Of Eutectic Aluminium-Silicon Alloy Solidified Under The Influence Of Mechanical Mold Vibration, Authors: 1 Vardhaman S.Mudakappanavar2,Ravikumar R N ,Tataram K Chavan3 Link |