Faculty Profile

About

Sangamesh C. Godi received his M.E in Mechanical Engineering from BITS Pilani, Pilani Campus, and Ph.D. from the Department of Mechanical Engineering, IIT Madras in 2020. After his master's he served as a faculty member at SIR MVIT Bangalore and later went to IIT Madras to pursue Ph.D. and is currently a faculty member in the Department of Mechanical Engineering at BMSCE Bengaluru.

Education

• Ph.D. - Thermal Engineering
  IIT Madras
  Passed Year: 2020 | Program Type: FullTime

Selected Publications

• Conference | Published On : 17-12-2020
  Ananda Prasanna, Buchi Raju Adapa., Sangamesh C. Godi., Pattamatta, A., and Balaji, C,
  Ananda Prasanna, Buchi Raju Adapa., Sangamesh C. Godi., Pattamatta, A., and Balaji, C, “A numerical investigation on lip geometry in a tangential film cooling of an annular combustor,” 3rd National Aero Propulsion Conference, 17-19 December 2020, B.M.S.C.E, Bengaluru Karnataka, India.
• Conference | Published On : 31-10-2020
  Hemant Naik., Sangamesh C. Godi., Harikrishanan, and Shaligram Tiwari
  Hemant Naik., Sangamesh C. Godi., Harikrishanan, and Shaligram Tiwari, “Irreversibility Analysis of Flow past Curved Rectangular Winglet Placed in a Channel,” 2nd virtual National Conference, 31st October-2nd November 2020, N.I.T. Jamshedpur, India.
• Journal | Published On : 01-10-2020
  Godi, S. C., Pattamatta, A., and Balaji, C.
  Godi, S. C., Pattamatta, A., and Balaji, C. (2020). Heat transfer from a single and row of three-dimensional wall jets-A combined experimental and numerical study. International Journal of Heat and Mass Transfer, 159, 119801. . (Impact factor: 4.947)
  Weblink
• Journal | Published On : 01-11-2019
  Godi, S. C., Pattamatta, A., and Balaji, C.
  Godi, S. C., Pattamatta, A., and Balaji, C. (2019). Effect of the Inlet Geometry on the Flow and Heat Transfer Characteristics of Three-Dimensional Wall Jets. Journal of Heat Transfer, 141(11). (Impact factor: 1.787)
  Weblink
• Journal | Published On : 14-01-2019
  Godi, S. C., Satyanand Abrahim, Pattamatta, A., and Balaji, C
  Godi, S. C., Satyanand Abrahim, Pattamatta, A., and Balaji, C. (2019). “Evaluation of candidate strategies for the estimation of local heat transfer coefficient from wall jets.” Experimental Heat Transfer, (Impact factor: 2.503)
  Weblink
• Conference | Published On : 17-12-2018
  Godi, S. C., Ananda Prasanna, Pattamatta, A., and Balaji, C
  Godi, S. C., Ananda Prasanna, Pattamatta, A., and Balaji, C, “Heat transfer characteristics of a single row of three-dimensional wall jets,” 2nd National Aero Propulsion Conference, 17-19 December 2018, I.I.T. Kharagpur, West Bengal, India.
• Conference | Published On : 27-12-2017
  Godi, S. C., Pattamatta, A., and Balaji, C.
  Godi, S. C., Pattamatta, A., and Balaji, C, “Effect of the inlet geometry on the flow and heat transfer characteristics of three-dimensional wall jets,” 24rd National and 2nd ISHMT–ASTFE Heat and Mass Transfer Conference, 27-30 December 2017, BITS Pilani, Hyderabad, Telangana state, India.
• Journal | Published On : 01-01-2017
  Ansu, U., Godi, S. C., Pattamatta, A., and Balaji, C
  Ansu, U., Godi, S. C., Pattamatta, A., and Balaji, C. (2017). “Experimental investigation of the inlet condition on jet impingement heat transfer using liquid crystal thermography.” Experimental Thermal and Fluid Science, 80, 363-375. (Impact factor: 3.444)
  Weblink
• Conference | Published On : 11-11-2016
  Godi, S. C., Pattamatta, A., and Balaji, C,
  Godi, S. C., Pattamatta, A., and Balaji, C, “Transient heat transfer measurements for planar and circular wall jets using liquid crystal thermography,” ASME’s IMECE., 11-17 November 2016, Phoenix, Arizona, U.S.A.
• Conference | Published On : 17-12-2015
  Godi, S. C., Chinage Sampat Kumar, Pattamatta, A., and Balaji, C
  Godi, S. C., Chinage Sampat Kumar, Pattamatta, A., and Balaji, C, “Transient heat transfer measurements for single round impinging orifice and nozzle type jet using liquid crystal thermography,” 23rd National and 1st ISHMT–ASTFE Heat and Mass Transfer Conference, 17-20 December 2015, Thiruvananthapuram, Kerala, India.