Faculty Profile

About

My self-Mr. Suresh Erannagari, obtained Diploma in Mechanical Engineering from Government Polytechnic, Nandyal in 1999, Bachelor of Technology in Mechanical Engineering from RGIT, Nandyal, Kurnool district, Affiliated to JNTU Hyderabad, in 2003, M.E in Machine Design from U.V.C.E , Bangalore University, Bangalore in 2008. And currently pursuing Doctor of Philosophy in Polymer composites from VIT University Vellore. I am currently working as Assistant Professor in the Department of Mechanical Engineering, B.M.S. College of Engineering, Bengaluru-560 019, since 2011. I am the author of about 12 technical papers accepted in both refereed journals and conferences.

Education

• M.E - Machine Design
  UVCE / Bangalore University
  Passed Year: 2007 | Program Type: FullTime
• B.Tech - Mechanical Engineering
  RGIT, Nandyal, JNTU-H affiliated.
  Passed Year: 2003 | Program Type: FullTime

Selected Publications

• Journal | Published On : 07-05-2024
  Mahantesh M. Math, K V S Rajeswara Rao, M. N. Gururaja, J. S. Srikantamurthy, Suresh Erannagari, S. Ramesh, V L Jagannatha Guptha & B. N. Prashanth
  Enhanced Tribological Properties of Nano-TiO2 Reinforced Polymer Composites Fabricated via Stereolithography
  Weblink
• Journal | Published On : 01-02-2024
  Haridasa Nayak1 · Shanthala Kollur2 · K. Prasad3 · Suresh Erannagari4 · C. Durga Prasad2 · N. Nagabhushana5
  Development of Equal Proportional YSZ+ Al2O3 Thermal Barrier Coating and Efect of Coating Thickness on the Corrosion Behaviour on Cast Iron Substrate
  Weblink
• Journal | Published On : 28-01-2024
  Syed Jabiulla1,2 · L. J. Kirthan1 · R. Girish Kumar1 · Ramakrishna Hegde1 · Mahantesh M. Math1 · V. A. Girisha1 · Suresh Erannagari3
  Experimental and Numerical Evaluation of In?plane Tensile Mode Stress Intensity Factor for Edge Crack Using Empirical Formulation of Displacement Extrapolation Method
  Weblink
• Journal | Published On : 21-07-2022
  A. N. Santhosh, S. Aprameyan , Suresh Erannagari andasantha Kumar
  Influence of Alloying Element and Ageing on Microstructure and Dry Sliding Wear Behaviour of Cu-Zn-xNi Alloy Journal of Mines, Metals and Fuels, 70(7) : 1-15; 2022. DOI: 10.18311/jmmf/2022/30799
  Weblink
• Journal | Published On : 08-08-2018
  Suresh, E, S.V., Chatterjee, R., Ramya, M., ., Padmanabhan, K.
  • A Comparative Study of the Three Point and Four Point Bending Behavior of Rigid Foam Core Glass/Epoxy Face Sheet Sandwich Composites Iyer, S.V., Chatterjee, R., Ramya, M., Suresh, E., Padmanabhan, K. 2018 Materials Today: Proceedings
• Journal | Published On : 01-06-2018
  Suresh, E., Padmanabhan, K
  • Prediction of Flexural Behavior of Rigid Foam Sandwich Composites through Mode 1, Mode 2 and Mixed Mode Failures Suresh, E., Padmanabhan, K. 2018 Materials Today: Proceedings
• Journal | Published On : 20-07-2017
  Suresh, E, Vishnu Vardhan Reddy, D., Ramya, M., ., Padmanabhan, K
  • Influence of hygrothermal conditioning on strength and stiffness of rigid foam core glass/epoxy skin sandwich composites
• Journal | Published On : 20-07-2017
  Suresh, E, Chandra, M., Ramya, M., Suresh, E., Padmanabhan, K
  • Finite Element Analysis of Glass/Epoxy Skin and Rigid Foam Core Sandwich Composites - Simulation of Shear Modes and Flexural Modes of Failure
• Journal | Published On : 20-07-2017
  Suresh, E.,Vishnu Vardhan Reddy, G., Ramya, M., Padmanabhan, K
  • Shear Flow Analysis in Foam Core-Glass/ Epoxy Face sheet Sandwich Composites
• Journal | Published On : 18-06-2014
  Suresh, E., Hemnath, T., Padmanabhan, K
  • Studies on flexural optimization of glass fabric-epoxy skin/rigid foam core sandwich composites

Other Information

Additional Responsibilities
• Member DPC, Dept. of Mechanical Engineering, BMSCE.
• Placement Coordinator, Dept. of Mechanical Engineering, BMSCE.
• Faculty in charge for EME lab, Dept. of Mechanical Engineering, BMSCE.

Download Resume