# Year Details
1.2019"Feasibility studies on newly conceptualized Inter-shaft Squeeze Film Damper (ISSFD) Rings for Vibration Attenuation" Sixth National Symposium on Rotor Dynamics NSRD-2019, July 2-3, 2019 CSIR National Aerospace Laboratories, Bangalore.
2.2019"High strain rate behavior of Ti-900 alloy using split hopkinson system" INCAM 2019 Conference, 3-5 July 2019, IISc Bangalore
3.2019"A study on the effect of off-axis loading on the fatigue strength of FRPs using modeling techniques" INCAM 2019 Conference, 3-5 July 2019, IISc Bangalore.
4.2019"Effect of process parameters on the MRR while machining Zinc coated CI using Wire EDM" Presented at CogNIEscience, a National level paper presentation held at NIE, Mysore on 11th of April 2019.
5.2019"Effect of Process Parameters on Machining Time in Abrasive-Waterjet Cutting of Marble" Presented at CogNIEscience, a National level paper presentation held at NIE, Mysore on 11th of April 2019.
6.2019"Experimental Performance Evaluation of Thermoacoustic Refrigerator made up of Poly-Vinyl-Chloride for different Parallel Plate Stacks using Air as a working medium" 2nd International Conference on Materials, Manufacturing & Modelling (ICMMM-2019) 29th - 31ST March,2019, VIT, Vellore, Tamil Nadu
7.2019"Optimum performance analysis of horizontal axis wind Turbine" Researchfora, International Conference on Science Engineering & Technology (ICSET) at New Delhi
8.2019"Optimized additive manufacturing technology using digital twins and cyber physical systems" 16th International Conference on Remote Engineering and Virtual Instrumentation (REV-2019)
9.2019"A skill enhancement virtual training model for additive manufacturing technologies" 16th International Conference on Remote Engineering and Virtual Instrumentation (REV-2019)
10.2019"Effect of Dynamic Pressure on the Perfromance of Thermoacoustic refrigerator with Aluminium (AI) Resonator. International Conference on Recent advances in Material and Manufacturing Technology 28-29 November 2017, Dubai UAE. (IIMT – 2017).
11.2018"Study on Mass Flow Rate in Labyrinth Seal using CFD Analysis" 5th International Conference on Applied Science Engineering and Technology (ICASET-18), dated 17th - 18th May 2018. The technical conference was jointly organized by Sri Sairam College of Engineering, Anekal, Bengaluru & Institute for Engineering Research and Publication (IFERP).
12.2018"Optimization of Process Parameters in Wire EDM of AlSiC MMC using Taguchi’s Technique" International Conference on Trends in Industrial and value Engineering Business and Social Innovation ICIVBS-2018 , 2nd,3rd & 4th APRIL 2018 at Dayananda Sagar College of Engineering.
13.2018"Optimization of Process Parameters in Wire EDM of Cu-Cr-Zr Alloy Material using Taguchi’s Technique" International Conference on Trends in Industrial and value Engineering Business and Social Innovation ICIVBS-2018 , 2nd,3rd & 4th APRIL 2018 at Dayananda Sagar College of Engineering.
14.2018"Study of Convergence of results in finite element analysis of a plane stress bracket National Conference on Advances in Mechanical Engineering", NAME – 2018 , JNNCE, Shivamogga
15.2018"CFD Analysis of Two-PCB Architecture for the Application in Data Storage Industry" National Conference on Advances in Mechanical Engineering, NAME – 2018, April 2018, JNNCE, Shivamogga
16.2018"DESIGN AND FABRICATION OF LOW COST ALL TERRAIN ELECTRIC WHEEL CHAIR". National Conference on Industrial Innovative Management Practices ( IIMP - 2018) 15-16, March 2018 at Dr.AIT, Bengaluru-56
17.2018"MICRO-STRUCTURE AND ELEMENTARY ANALYSIS OF SS-304/434 FOR SOLAR WATER HEATER APPLICATIONS" National Conference Industrial Innovative Management Practices,( IIMP - 2018) 15-16, March 2018 at Dr.AIT, Bengaluru-56
18.2018"Surface Heat Flux Variation by a Forward Facing Cavity in a Hypersonic Flow" National Symposium on Shockwaves (NSSW) -2018, organised by Terminal Ballistic Research Laboratory, 26-28th Feb 2018, at Chandigarh. 
19.2018"A review on electric mobility" National Conference electrical mobility (NCEM2K18),SRM Institute of Science and Technology University Chennai
20.2018"Estimation and Comparison of Electrode Wear and AE Parameters in Machining of P-20 Tool Steel Material in Wire Electric Discharge Machining using MRA and GMDH" COPEN-10, IIT, Madras
21.2018"Behavior of Stress Intensity factor of Semi-Elliptical Crack at different orientations subjected to Thermal Load" International Conference on Emerging Trends Engg & Science Technology, ICETEST – PDME -2018, 18-20 Jan.2018
22.2018“Comparative Studies on Composition of Internal Vitrified Grinding Wheels” International Conference on Composite Materials: Manufacturing, Experimental Techniques Modeling and Simulation (ICCMMEMS-2018). 2214-7853 © 2018 Elsevier Ltd. 4.
23.2017"Study of Vibration Analysis Of Air Filter And Pressure Regulating Valve Assembly Using Finite Element Analysis And Experimental Methods" ICOVP, 13th International Conference on Vibration Problems 29th November – 2nd December, 2017, Indian Institute of Technology Guwahati, INDIA
24.2017"Leakage Flow Analysis of Padded Seal for a Gas Turbine Application" 9th International Conference on Industrial Tribology (ICIT-2017), December 6-9,2017, Kolkata, India
25.2017"Stiffness variation Study of fingers in finger seal" 9th International Conference on Industrial Tribology (ICIT-2017), December 6-9,2017, Kolkata, India
26.2017"Optimisation Of Shell And Double Concentric Tube Heat Exchanger Using The Cuckoo Optimization Algorithm" Proceedings of the 24thNational and 2ndInternationalISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS Pilani,Hyderabad, India.
27.2017"Effect of Shim Thickness on Damping Characteristics of Bump Foil Squeeze Film Damper" 9th International Conference on Industrial Tribology (ICIT-2017), December 6-9,2017, Kolkata, India
28.2017”Abrasive Water Jet Turning of Aluminum-silicon Carbide Metal Matrix Composites” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), December 07-09, 2017, Indian Institute of Technology Madras, Chennai-600 036, India, pp 412-415
29.2017“Effect of Process Parameters on Abrasive Water Jet Penetration Capabilities on Inconel 718” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), December 07-09, 2017, Indian Institute of Technology Madras, Chennai-600 036, India, pp 404-407
30.2017“An analytical model for predicting depth of penetration in abrasive waterjet cutting of metal matrix composites” 9th International Conference on Industrial Tribology (ICIT-2017), December 6-9,2017, Kolkata, India, December 06-09, 2017
31.2017"An experimental investigation and analysis of the effect of tool material and Zirconia reinforcement on machinability of Al-Zirconia nanocomposites during" 9th International Conference on Industrial Tribology (ICIT-2017), December 6-9,2017, Kolkata, India
32.2017"An experimental investigation and analysis of the effect of tool material and Zirconia reinforcement on machinability of Al-Zirconia nanocomposites during" 9th International Conference on Industrial Tribology (ICIT-2017), December 6-9,2017, Kolkata, India
33.2017"Comparative Investigation and Operational Performance Characteristics of a Wick Assisted and Axially Square Grooved Heat Pipe" International Conference (IMMT) at BITS-Pilani, Dubai
34.2017Effect of Dynamic Pressure on the Performance of Thermoacoustic Refrigerator with Aluminium (Al) Resonator "International Conference (IMMT) at BITS-Pilani, Dubai"
35.2017"Manufacturing of Helical Gears using Abrasive Waterjet Machining and Gear Hobbing - A Comparision " International conference on Manufacturing Technology and simulation during 7th & 8th, July 2017 held IIT Madras, pp 386-390.
36.2017Numerical Analysis of Surface Heat Flux in a Forward Facing Cavity 31st International Symposium on Shock Waves, 9-14 July 2017, Nagoya, Japan
37.2017"Selection and bonding meterial for Manufaccturing grinding wheel" International Conference, ICAMES-2017, , held between 21st-22nd April, 2017 at PES College of Engineering, Mandya
38.2017"Estimation and Comparison of Machining Performances in WEDM for HCHCr Material using MRA and GMDH" International Conference, ICAMES-2017, , held between 21st-22nd April, 2017 at PES College of Engineering, Mandya
39.2017"Estimation and Comparison of Surface Roughness and AE Parameters of P-20 tool steel Material in Wire Electric Discharge Machining using Multiple Regression Analysis and Group Method Data Handling Technique" International Conference, ICAMES-2017, , held between 21st-22nd April, 2017 at PES College of Engineering, Mandya.
40.2017"Analysis of ‘Dynamic Properties of Aluminum 6061 Reinforced With Varying Percentage of Graphene" International Conference, ICAMES-2017, , held between 21st-22nd April, 2017 at PES College of Engineering, Mandya.
41.2017"Analysis of Temperature Distribution on Disk Brake Subjected to Free and Forced Convection" Proceedings of International Conference on Frontiers in Engg, Applied Sciences & Technology 31.03.2017 & 01.04.2017
42.2017"Performance enhancement of a single basin solar still integrated with evacuated tubes using thermal storage beds: An experimental study" Proceedings of International Conference on Frontiers in Engg, Applied Sciences & Technology 31.03.2017 & 01.04.2017
43.2017"Mechanical and electrical property characterization of low cost porous carbon nano particles reinforced epoxy" Proceedings of ISAMPE National Conference on Composites INCCOM-15, 2nd & 3rd March 2017
44.2017“Finite Element and Experimental Analysis of Loss Factor for an Annular Plate,” 18th ISME Conference February 23—25, 2017, NIT Warangal.
45.2017"An Experimental Investigation of Flexural Optimization for Strength and Stiffness in Rigid Foam Core Glass Fabric/Epoxy Face-sheet Sandwich Composites" Proceedings of The nineteenth National Seminar on Aerospace Structures, Feb 23-25, 2017, VIT –Vellore.
46.2017"Optimization of Cutting Parameters in Drilling of Epoxy Resin Composite Material using Taguchi’s Technique" International Conference, ICAMES-2017, , held between 21st-22nd April, 2017 at PES College of Engineering, Mandya
47.2016"Evaluation of Corrosion Property of Aluminium-Zirconium Dioxide(AlZrO2) Nanocomposites" ICCM 2016: 18th International Conference on Composite Materials at London, UK 17-18 October, 2016
48.2016"Analysis of Uncertainty in Digital Image Correlation Technique for Strain Measurement" Proc.International Conference on Smart Engineering Materials ICSEM - 2016, Bengaluru
49.2016"Wing Morphing to Improve Control Performance of an Aircraft - An Overview and a Case Study" Proc.International Conference on Smart Engineering Materials ICSEM - 2016, Bengaluru
50.2016"Predicting Depth of Penetration in Abrasive Waterjet Cutting of Polycrystalline Ceramics" ICCM 2016: 18th International Conference on Composite Materials at London, UK 17-18 October, 2016
51.2016"Fracture Mechanics Analysis of a Nuclear Reactor Steam Generator Tube with an Axial Through wall Trapezoidal Crack" International NAFEMS Conference on Engineering Analysis, Modeling, Simulation  and 3D Printing, NAFEMS-3D-2016, Bengaluru, 30-31 August 2016.
52.2016"Analysis of Taylor-Couette flow between Annulus of Rotating Cyliners" 28th IRF International Conference, Bengaluru ISBN: 978-93-86083-59-3
53.2016"Damage Tolerance Assessment of Laminated Composite Plates subjected to Ballistic Impact" First Structural Integrity Conference & Exhibition, SICE-2016, Indian Institute of Science, Bangalore, 4-6 July 2016.
54.2016"Determination of Damping Coefficient of a Bump Foil Squeeze Film Damper" ICMED-2016 at SSN College of Engineering, Chennai on 25-26 April 2016
55.2016"Feasibility and Performance Studies of a Semi Active Journal Bearing" SJCET, PALAI, KERALA on 22-23 April 2016
56.2016"Comparative Experimental analysis of Load carrying capability of Air foil thrust bearing for different configuration of foil assembly". International Conference on Recent Advancements and Effectual Researches in Engineering, Science Technology at St.Josehphs College of Engineering & Technology Pala, Kerala on 21-24 April 2016
57.2016"Estimation of Machining Performances in WEDM of Aluminium based Metal Matrix Composite Material using ANN" International Conference on Recent Trends in Engineering and Materials ( ICEMS-2016) at Jaipur National University, Jaipur.
58.2016"Effect of ambient heat-in-leak on transient behaviour of a three fluid heat exchanger with two thermal communications subject to step change in hot fluid inlet temperature using finite element method". International Conference on Recent Trends in Engineering and Materials ( ICEMS-2016) at Jaipur National University, Jaipur.
59.2016"Study of Surface Roughness and AE Signals while machining Titanium Grade-2 Material using ANN in WEDM" International Conference on Recent Trends in Engineering and Materials ( ICEMS-2016) at Jaipur National University, Jaipur.
60.2016"Mixed Mode Fracture of Nuclear Reactor Steam Generator Helical Coil tube with Arbitrarily Oriented Cracks Subjected to Internal Pressure" AMEAS – 2016,Dayanand Sagar College of Engineering, Bangalore, Feb.19-20, 2016 ISBN: 978-93-84935-77-1, pp 118-122
61.2016"Sustainability Initiatives Reducing Environmental Impact" National Conference on Make in India Ecosystem on 30th January 2016 at DSCE
62.2016"Analysis of Horizontal Axis Wind Turbine" Proc. Nat.Conf. on Recent Advancements in Mechanical Engineering and Allied Fields, RAMEAF -2016 Sir.M.Visvesvaraya Institute of Technology, Bengaluru, 23-24 September 2016
63.2016“A review paper on Essence of Creativity & Innovation in Entrepreneurship” National Conference on Make in India Ecosystem on 30th January 2016 at DSCE
64.2016“Social Media Networking: A Boon in present day context" National Conference on Make in India Ecosystem on 30th January 2016 at DSCE
65.2016"Industry –Academy Partnerships" 8-12th January 2016, ICTIEE 2016, College of Engineering, Pune
66.2016"Importance of Spirit of Inquiry in Engineering Education" 8-12th January 2016 ICTIEE 2016, College of Engineering, Pune
67.2016"Effect of Autonomy – Positive Outcomes in Teaching Learning Process – A Case Study" 8-12th January 2016, ICTIEE-2016, organised at College of Engg. Pune.
68.2015"Process Parametric Optimization in Wire EDM of Al2024 based Hybrid MMC using Taguchi’s Technique" National Conference on Role of Mechanical Engineering and Computational Science for a sustainable Future, Dayananda Sagar College of Engineering, Bangalore, 25-26, September, 2015.
69.2015"Development of low cost surface finishing equipment for surface finish enhancement in 3D Printed Parts 5th International" Conference on 'Additive Manufacturing Technologies, AMSI 2015' Global Additive Manufacturing Summit on 7-8th September, 2015 at Nimhans Convention Center, Bengaluru.
70.2015"Stress Intensity Factors For Axial Through Crack in Cylindrical Shell with Tori-Spherical End Closure" Proceedings of International Conference on Modern, Intelligent and Green Manufacturing ICMIGM 2015 December 11-12, 2015, ESEC, Erode, TN, India
71.2015"Estimation and comparison of acoustic emission parameters and surface roughness in wire cut electric discharge machining of stavax material using multiple regression analysis and group method data handling technique" International Conference -COPEN-9, IIT-Bombay, December, 10-12, 2015.
72.2015"Optimization of Cutting Parameters in Drilling of CFRE Composite Material using Taguchi’s Technique" International Conference -COPEN-9, IIT-Bombay, December, 10-12, 2015.
73.2015"Comparison of Machining Performances in Wire EDM of Al2024 based Hybrid MMC using MRA, GMDH and ANN" International Conference -COPEN-9, IIT-Bombay, December, 10-12, 2015.
74.2015"Effect of Thrust Force, Vibration and Temperature on Drilling of Aluminium Alloy with Silicon Nitride Reinforcement" International Conference -COPEN-9, IIT-Bombay, December, 10-12, 2015.
75.2015"Process Parameter Optimization in Drilling of Epoxy Resin Reinforced with Carbon Fibers and Silicon Nitride" International Conference -COPEN-9, IIT-Bombay, December, 10-12, 2015.
76.2015"PERFORMANCE STUDIES OF CASCADED AIR FOIL THRUST BEARINGS" International Conference on Tribology , 7-9 October 2015, Yildiz Technical University, ISTAN BUL, TURKEY.
# Year Details
1.2019Effect of heat treatment on hardness, tensile strength and microstructure of hot and cold forged Al6061 metal matrix composites reinforced with silicon carbide particles
Download Link
2.2019Abrasive water jet drilling of float glass and characterization of hole profile
Download Link
3.2019Effect of Process Parameters on Depth of Penetration & Surface Roughness in Abrasive Waterjet Cutting of Copper
Download Link
4.2019Machining Capabilities of Abrasive Waterjet on Stainless Steel 304
Download Link
5.2019"Static Stiffness Parametric Studies of Newly Conceptualized Inter Shaft Squeeze Film Damper (ISSFD) Rings" International Journal of Engineering Materials and Manufacture(2019) 4 (2) 77-84 https://doi.org/10.26776/ijemm.04.02.2019.05
Link
6.2019"Enhanced tensile properties of novel bio-waste synthesized carbon particle reinforced composites" ELSEVIER Materials Letters 251 (2019) 110–113
Link
7.2019"Effect of Volume Fraction and Resin System on Tensile, Compression and Flexural Strength of Electrial Glass Fiber Reinforced Plastic Laminate" Solid State Phenomena, ISSN: 1662-9779, Vol.287, pp86-92, doi.10.4028/www.Scientific.net/SSP 287.86@2019 Trans Tech Publications, Switzerland
Link
8.2019"Influence of MWCNT addition on mechanical properties of density graded E-glass fiber reinforced polyester resin composites" AIP Conference Proceedings 2057, 020040(2019): https://doi.org/10.1063/1.5085611
Link
9.2018"Effect of process parameters on depth of penetration and topography of AZ91 magnesium alloy in abrasive water jet cutting" ELSEVIER, Journal of Magnesium and Alloys Volume 6, Issue 4, December 2018, Pages 366-374
Link
10.2018"CFD Analysis of two-PCB Architecture for the Application in Data Storage Industry" International Journal of Scientific & Engineering Research Volume 9, Issue 5, May-2018 ISSN 2229-5518
Link
11.2018"Study of Convergence of Results in Finite Element Analysis of a Plane Stress Bracket" Journal of Engineering Research and Application www.ijera.com ISSN : 2248-9622, PP 07-12
Link
12.2018"Effect of exhaust gas recirculation on a CRDI engine fueled with waste plastic oil blend" Fuel - ELSEVIER, Volume 227, 1 September 2018, Pages 394–400
Link
13.2018"Effect of Dynamic Pressure on the Performance of Thermoacoustic Refrigerator with Aluminium (Al) Resonator" IOP Conf. Series: Materials Science and Engineering 346 (2018) 012034 doi:10.1088/1757-899X/346/1/012034
Link
14.2018"Aircraft Fuel Manifold Design Substantiation and Additive Manufacturing Technique Assessment Using Finite Element Analysis" Journal of Engineering & Technology, 7(2), March 2018, pp 94-99, ISSN: 2319-9873
Link
15.2018"Abrasive waterjet cutting of aluminium 6061-silicon carbide metal matrix composites" Indian Foundry Journal, vol-64, Issue-3, March 2018, 48-54. ISSN 0379-5446.
Link
16.2018"Heat flux characteristics within and outside a forward facing cavity in a hypersonic flow" ELSEVIER Experimental Thermal and Fluid Science 97 (2018) pp 59–69
Link
17.2018"Preliminary studies of Newly Conceptualized Intershaft Squeeze Film Damper (ISSFD) Rings" International Journal of Applied Engineering Research, ISSN 0973-4562 Volume 13, Number 7 (2018) pp. 5304-5310
Link
18.2018"A Review on Influence of Cutting Edge Micro Geometry On Machining" International Journal of Innovation in Engineering Research & Management, ISSN: 2348-4918
Link
19.2018"Sheet Metal Forming Processes-Recent Technological Advances" ELSEVIER Materials Today: Proceedings, Volume 5, Issue1, Part 3, 2018, 2564-2574
Link
20.2018"Optimization of Process Parameters for SS304 in Wire Electrical Discharge Machining using Taguchi’s Technique" ELSEVIER, Materials Today: Proceedings 5 (2018) 2877–2883
Link
21.2018"Optimization of Process Parameters for Al6061-Al7075 alloys in Friction Stir Welding using Taguchi’s Technique" ELSEVIER Materials Today: Proceedings 5 (2018) 3027–3035
Link
22.2018"Estimation of Machining Performances using MRA and GMDH in Wire EDM of Al2024 based Hybrid MMC" ELSEVIER Materials Today: Proceedings 5 (2018) 3084–3092
Link
23.2018"Split Hopkinson Pressure Bar Apparatus for Compression Testing: A Review" ELSEVIER Materials Today: Proceedings 5 (2018) 2824–2829
Link
24.2018"Fracture toughness and fatigue behavior of spider silk and S-glass epoxy composites: An FEM approach" ELSEVIER Materials Today: Proceedings 5 (2018) 2627–2634
Link
25.2018"Machinability Studies on Stainless steel by abrasive water jet - Review" ELSEVIER Materials Today: Proceedings 5 (2018) 2871–2876
Link
26.2018"Machinability Studies of Aluminium 6061 cut by Abrasive Water Jet" ELSEVIER Materials Today: Proceedings 5 (2018) 2865–2870
Link
27.2018"An Experimental Study on Depth of Cut of AZ91 Magnesium Alloy in Abrasive Water Jet Cutting ELSEVIER" Materials Today: Proceedings 5 (2018) 2884–2890
Link
28.2018"Determination of Shear Strength and Failure Type of the Sealant using Lap Shear Test" ELSEVIER Materials Today: Proceedings 5 (2018) 2752–2758
Link
29.2018"Electrical Conductivity Studies of Glass Fiber Reinforced Polymer Composites ELSEVIER" Materials Today: Proceedings 5 (2018) 3229-3236
Link
30.2018"Coatings for Enhancement of Properties of Polymer Matrix Composites: A review" ELSEVIER, Materials Today: Proceedings 5 (2018) 2462–2465
Link
31.2018"Effect of Orientation of Semi-Elliptical Crack in a Turbine Blade on Stress Intensity Factor" ISME Journal of Mechanics and Design Vol. 01, No.2, pp. 01-10
Link
32.2018“Comparative Investigation and Operational Performance Characteristics of a Wick Assisted and Axially Square Grooved Heat Pipe” IOP Conference Series: Materials Science and Engineering, 346 (2018) 012082 doi:10.1088/1757-899X/346/1/012082.
Link
33.2017"Study of Surface Roughness and AE Signals while Machining Titanium Grade-2 Material using ANN in WEDM " ELSEVIER Materials Today: Proceedings 4 (2017) 9557–9560
Link
34.2017"Estimation of Machining Performances in WEDM of Aluminium based Metal Matrix Composite Material using ANN" ELSEVIER, Materials Today: Proceedings 4 (2017) 10035–10038
Link
35.2017"Effect of ambient heat-in-leak on transient behaviour of three-fluid heat exchanger with two thermal communications using finite element method" ELSEVIER Materials Today: Proceedings 4 (2017) 10596–10602
Link
36.2017"Measurement And Analysis Of Magnetic Flux Density Using 3 Axis Bot" International Journal of Recent Scientific Research Research Vol. 8, Issue, 9, pp. 19845-19849, September, 2017
Link
37.2017"Evaluating the Tensile Properties of Aluminum Foundry Alloys through Reference Castings—A Review" Materials 2017,10,1011;doi:10.3390/ma10091011
Link
38.2017"Prediction of mode II delamination propagation life under a standard spectrum loading in a carbon fiber composite" Journal of Composite Materials 2017, Vol. 51(20) 2827–2833 DOI: 10.1177/0021998316684656 journals.sagepub.com/home/jcm
Link
39.2017"Prediction of Machining Characteristics using Artificial Neural Network in Wire EDM of Al7075 based In-situ Composite" ELSEVIER Materials Today: Proceedings 4 (2017) 203–212
Link
40.2017"Design, Analysis and Farication of Micro Class UAV" International Journal of Aerospace and Mechanical Engineering ISSN(O):2393-8609 Volume 4 – No.2 ,April 2017
Link
41.2017"Prediction of Flexural Behaviour of Rigid Foam Sandwich Composites Through Mode 1, Mode 2 and Mixed Mode Failures" Materials Today: Proceedings Volume 5, Issue 5, Part 2, 2018, Pages 12091-12097
Link
42.2017"Determination of Damping Coefficient of a Bump Foil Squeeze Film Damper" Int. J. Vehicle Structures & Systems, 8(4), 246-249, IISN:0975-3060(Print), 0975-3540(online) doi:10.4273/ijvss.8.4.11©2016. MechAero Foundation for Technical Research & Education Excellence
Link
43.2016"Transient behavior of three-fluid heat exchanger with three thermal communications under step change in inlet temperature of fluids using finite element method" Applied Thermal Engineering 108 (2016) 1390–1400
Link
44.2016"Sheet Metal Forming Processes – Recent Technological Advances" ELSEVIER, Science Direct, Materials Today: Proceedings Volume 5, Issue 1, Part 3, 2018, Pages 2564-2574, https://doi.org/10.1016/j.matpr.2017.11.040
Link
45.2016"Fatigue Experienced by students in a day long class : A Survey on students" International Journal of Engineering Research and Advanced Technology (IJERAT) ISSN: 2454-6135 ( Special Volume.02 Issue.01,May-2016)
Link
46.2016"A Study on Interdisciplinary Technical Projects as related to Outcome Based Education" International Journal of Engineering Research and Advanced Technology (IJERAT) ISSN: 2454-6135 ( Special Volume.02 Issue.01,May-2016)
Link
47.2016"Heat Treatment of Ceramic Reinforced Aluminum Matrix Composites-A Review" International Journal of Advances in Engineering Research http://www.ijaer.com (IJAER) 2016, Vol. No. 11, Issue No. I, January e-ISSN: 2231-5152/ p-ISSN: 2454-1796
Link
48.2016"Comparative study of Surface Roughness and AE Signals while Machining Titanium Grade 2 & Stavax Materials using MRA and GMDH in WEDM" International Journal of Advanced Scientific Research and Management, Vol. 1 Issue 1, January 2016.
Link
49.2016Influence of stack geometry on the performance of thermoacoustic refrigerator, International Journal of Indian Academy of Science, ( Sadhana ) DOI 10.1007/s12046-016-0585-5 July 2016.
Link
50.2015"Detection of a Fatigue Crack in a Rotor System using Full-Spectrum Based Estimation" Sadhana - Academy Proceedings in Engineering Science. Ref.SADH-D-14-00841R1
Link
51.2015"Rayleigh–Taylor instability in a thermocline based thermal storage tank" International Journal of Thermal Sciences Volume 100, February 2016, Pages 333–345
Link
52.2015"Study of Slurry Erosive Wear Behavior of Titania-30 Wt% Inconel-718 Plasma Sprayed Mild Steel using Taguchi Technique" Applied Mechanics and Materials Vols. 813-814 (2015) pp 111-115 © (2015) Trans Tech Publications, Switzerland
Link
53.2015"A study of Corrosive behavior of Al6061 plasma sprayed with Titania and Inconel 718" Applied Mechanics and Materials Vols. 813-814 (2015) pp 151-155 © (2015) Trans Tech Publications, Switzerland
Link
54.2015"Analysis of Two Fluid Four-Channel Heat Exchanger Using Finite Element Method" Applied Mechanics and Materials Vols. 813-814 (2015) pp 658-662 © (2015) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.813-814.658
Link
55.2015"Analytical and Numerical Validation of Epoxy/Glass Structural Composites for Elastic Models" American Journal of Materials Science 2015, 5(3C): 162-168 DOI:10.5923/c.materials.201502.32
Link
56.2015"Finite Element Investigations of Temperature Distribution in Fins with Circular Perforations" American Journal of Materials Science 2015, 5(3C): 157-161 DOI:10.5923/c.materials.201502.31
Link
57.2015"Hardness and wear characteristics of Hybrid Aluminium Metal Matrix Composites produced by stir casting technique" ELSEVIER Materials Today: Proceedings 2 ( 2015 ) 2878 – 2885
Link
58.2015"Optimization of process parameters in drilling of epoxy Si3N4 composite material" ELSEVIER Materials Today: Proceedings 2 ( 2015 ) 2852 – 2861
Link
59.2015"Optimization of process parameters in wire EDM of HCHCr material using Taguchi’s technique" ELSEVIER, Materials Today: Proceedings 2 ( 2015 ) 2443 – 2452 ELSEVIER
Link
60.2015"Dynamic behaviour of a three fluid heat exchanger subjected to step change in inlet temperature of hot and cold fluids" International Journal of Numerical Methods for Heat & Fluid Flow Vol. 25 Iss 6 pp. 1311-1321
Link
61.2015Performance Evaluation of Thermoacoustic Refrigerator Using Air as Working Medium. International Journal of Thermal Engineering (SSRG-IJTE) volume 1, Issue 3 May to June 2015.
Link